| 注册
首页|期刊导航|钻探工程|岩溶地貌区浅层孔隙压力剖面的构建与钻探工艺探讨

岩溶地貌区浅层孔隙压力剖面的构建与钻探工艺探讨

孟祥龙 李大勇 甘新科 王胜建 迟焕鹏 朱迪斯 岳伟民 苑坤

钻探工程2025,Vol.52Issue(3):141-145,5.
钻探工程2025,Vol.52Issue(3):141-145,5.DOI:10.12143/j.ztgc.2025.03.018

岩溶地貌区浅层孔隙压力剖面的构建与钻探工艺探讨

Construction of shallow pore pressure profile and exploration of drilling technology in karst landform areas

孟祥龙 1李大勇 1甘新科 2王胜建 1迟焕鹏 1朱迪斯 1岳伟民 1苑坤1

作者信息

  • 1. 中国地质调查局油气资源调查中心,北京 100083||中国地质调查局非常规油气地质重点实验室,北京 100083
  • 2. 新疆亚新煤层气投资开发(集团)有限责任公司,新疆 乌鲁木齐 830063
  • 折叠

摘要

Abstract

During the drilling process of shallow strata in karst landform areas,a large number of complex situations such as leakage and water inflow occur.The widely developed fracture and cave network in the strata forms fluid migration channels,and the pressure difference between drilling fluid and formation water is also an important influencing factor.Conventional pore pressure prediction methods cannot effectively characterize shallow pore pressure.To explore the actual distribution of shallow pore pressure in karst landform areas,a shallow pore pressure profile based on the actual distribution of groundwater was constructed based on hydrogeological and fluid mechanics principles.The effectiveness of the profile was verified by an exploration well drilling in west Guizhou Province.The results showed that there were multiple pressure zones in the shallow layer of karst landform areas,which were closely related to the distribution of groundwater.No pore pressure exists above the groundwater level.The calculation of pore pressure in the groundwater layer should be based on the groundwater surface,which is a typical low-pressure zone.The pore pressure of a confined aquifer depends on the difference in location between the recharge and discharge zones,and may manifest as high pressure,low pressure,or normal pressure.The adaptability of plugging materials,clean water drilling,and air down the hole hammer drilling in karst landform areas are analyzed.It is recommended to fully utilize hydrogeological data in drilling design to construct shallow pressure profiles,based on which,selecting drilling processes or drilling process combinations,and determining the depth of drilling for each drilling section to avoid complex drilling situations and improve drilling efficiency.This study can provide reference for the design and implementation of drilling projects in karst landform areas.

关键词

岩溶地貌区/水文地质资料/浅层孔隙压力/井漏/井涌/钻探工艺

Key words

karst landform/hydrogeological data/shallow pore pressure/well leakage/well surge/drilling technology

分类

天文与地球科学

引用本文复制引用

孟祥龙,李大勇,甘新科,王胜建,迟焕鹏,朱迪斯,岳伟民,苑坤..岩溶地貌区浅层孔隙压力剖面的构建与钻探工艺探讨[J].钻探工程,2025,52(3):141-145,5.

基金项目

中国地质调查局油气资源调查中心科技创新基金项目"渝东二叠系大隆组硅质页岩储层可压裂性评价研究"(编号:油科创[2023]-QN02) (编号:油科创[2023]-QN02)

中国地质调查局地质调查项目"重点参数井钻探及配套技术应用"(编号:DD20242400) (编号:DD20242400)

钻探工程

2096-9686

访问量0
|
下载量0
段落导航相关论文