天津工业大学学报2025，Vol.44Issue(2)：1-7,7.DOI:10.3969/j.issn.1671-024x.2025.02.001
基于偏心理论的异型构件编织工艺推理方法
Braiding process reasoning method for special-shaped components based on off-center theory
摘要
Abstract
In order to realize accurate and autonomous production of braided preforms for special-shaped composite com-ponents,a process reasoning method for braiding special-shaped components based on the off-center theory is proposed.The off-center braiding parameters are proposed and the yarn deposition pattern under the off-center braiding is analyzed.The position equation of the yam falling point on the surface of the mandrel is established based on the response function of the convergence length over time.The surface contour features such as vari-able cross-section,large curvature of the profiled member are reconstructed by applying the model reconstruc-tion algorithm.The optimized design of the yarn distribution is carried out based on the contour features,and the reasoning for the process parameters such as the braiding speed,the take-up speed,and the trajectory are realized.The results show that the process reasoning method reduces the coverage difference between the inner and outer sides of the mandrel by 68.9％,and significantly improves the consistency of braided special-shaped preforms.关键词
编织工艺/复合材料/工艺推理/纤维增强体/偏心理论Key words
braiding process/composite materials/process reasoning/fiber reinforcement/off-center theory引用本文复制引用
崔博,阳海棠,李麒阳,俞建勇..基于偏心理论的异型构件编织工艺推理方法[J].天津工业大学学报,2025,44(2):1-7,7.基金项目
工业和信息化部项目(2023ZY01060-6) （2023ZY01060-6）
"纺织之光"应用基础研究项目(J202202) （J202202）
江苏省重点研发计划项目(BE2023070) （BE2023070）
