| 注册
首页|期刊导航|建筑钢结构进展|模块墙建筑新型钢-混凝土组合梁柱节点静力性能研究

模块墙建筑新型钢-混凝土组合梁柱节点静力性能研究

苏佶智 王公成 乔文涛 李瑞峰 黄智远

建筑钢结构进展2025,Vol.27Issue(5):10-18,9.
建筑钢结构进展2025,Vol.27Issue(5):10-18,9.DOI:10.13969/j.jzgjgjz.20231123001

模块墙建筑新型钢-混凝土组合梁柱节点静力性能研究

Static Performance Analysis of Novel Steel-Concrete Composite Beam-Column Joints in Modular Wall Construction

苏佶智 1王公成 2乔文涛 3李瑞峰 2黄智远2

作者信息

  • 1. 国网河北省电力有限公司经济技术研究院,石家庄 050023
  • 2. 石家庄铁道大学 土木工程学院,石家庄 050043
  • 3. 石家庄铁道大学 土木工程学院,石家庄 050043||石家庄铁道大学 道路与铁道工程安全保障省部共建教育部重点实验室,石家庄 050043
  • 折叠

摘要

Abstract

Based on the lightweight steel-concrete framework system of modular wall structures,this study proposed a lightweight steel-concrete composite column-H-shaped steel beam joint suitable for this system.In order to study the mechanical properties of this joint,monotonic loading tests were carried out on three groups of beam-column joint specimens.The experimental results indicate that under monotonic loading at the beam end,the joint exhibits distinct semi-rigidity characteristics.The failure is characterized by yielding deformation of the flange of the combined steel column and concrete cracking,ultimately leading to joint failure due to excessive bending deformation of the top angle steel and the cracking of the stiffener weld.A refined simulation was conducted using ABAQUS finite element software.The deformation process and failure characteristics of the finite element model agree with the experimental results.The researchers consider three key parameters,namely,the height of the H-shaped steel beam section,the thickness of the C-shaped steel,and the thickness of the angle steel,a parametric analysis was performed.The results indicate that increasing the beam section height and the thickness of the angle steel connector significantly enhances the joint's flexural load-carrying capacity and initial rotational stiffness.In contrast,increasing the thickness of the C-shaped steel has a limited impact on the joint's flexural load-carrying capacity,with a minor effect on the initial rotational stiffness.

关键词

模块墙建筑/冷弯薄壁型钢/梁柱节点/单调加载试验/参数分析/弯矩-转角关系

Key words

modular wall construction/cold-formed thin-walled steel/beam-column joint/monotonic loading test/parametric analysis/bending moment-rotation relationship

分类

建筑与水利

引用本文复制引用

苏佶智,王公成,乔文涛,李瑞峰,黄智远..模块墙建筑新型钢-混凝土组合梁柱节点静力性能研究[J].建筑钢结构进展,2025,27(5):10-18,9.

基金项目

河北省杰出青年科学基金(E2022210084) (E2022210084)

建筑钢结构进展

OA北大核心

1671-9379

访问量0
|
下载量0
段落导航相关论文