| 注册
首页|期刊导航|电机与控制应用|基于超螺旋滑模观测器的双三相永磁同步电机鲁棒性模型预测控制算法

基于超螺旋滑模观测器的双三相永磁同步电机鲁棒性模型预测控制算法

高梓伦 孙全增 孔钰 张志锋

电机与控制应用2025,Vol.52Issue(5):562-571,10.
电机与控制应用2025,Vol.52Issue(5):562-571,10.DOI:10.12177/emca.2025.027

基于超螺旋滑模观测器的双三相永磁同步电机鲁棒性模型预测控制算法

Robust Model Predictive Control Algorithms for Dual Three-Phase Permanent Magnet Synchronous Motors Based on Super-Twisting Sliding Mode Observers

高梓伦 1孙全增 1孔钰 1张志锋1

作者信息

  • 1. 沈阳工业大学电气工程学院,辽宁 沈阳 110870
  • 折叠

摘要

Abstract

[Objective]To address the issues of low robustness and high dependence on motor parameters in model predictive control(MPC)systems for dual three-phase permanent magnet synchronous motor(PMSM),this study improves and optimizes the sliding mode parameter identification method.A dual three-phase PMSM model predictive current control(MPCC)method based on super-twisting sliding mode observer(ST-SMO)parameter identification is proposed.[Methods]Firstly,a higher-order sliding mode algorithm was introduced to replace the switching function sign in traditional sliding mode observers as the new sliding mode reaching law.A super-twisting algorithm-based ST-SMO was designed to achieve more accurate identification of motor inductance parameters.Then,stability analysis of the designed higher-order sliding mode observer was conducted using Lyapunov theory.Combined with incremental equations,the prediction model in the MPCC system was optimized,eliminating the effect of flux linkage parameters on the robustness of the motor control system.Finally,the inductance parameters were accurately identified using the parameter identification algorithm,reducing the dependence of the MPCC system on motor parameters.[Results]The improved dual three-phase PMSM MPCC system incorporating the ST-SMO and incremental prediction model demonstrated excellent steady-state and dynamic performance.For parameter identification,it eliminated the chattering phenomenon caused by the first-order sliding mode system,improved the accuracy of parameter identification,and enhanced the identification speed of motor parameters.Additionally,the control system maintained high control performance for the dual three-phase PMSM under parameter mismatch conditions.[Conclusion]The MPCC system based on ST-SMO parameter identification proposed in this study demonstrates good feasibility and stability under various operating conditions,such as speed and torque sudden transients.

关键词

永磁同步电机/模型预测控制/系统鲁棒性/滑模观测器/参数辨识

Key words

permanent magnet synchronous motor/model predictive control/system robustness/sliding mode observer/parameter identification

分类

动力与电气工程

引用本文复制引用

高梓伦,孙全增,孔钰,张志锋..基于超螺旋滑模观测器的双三相永磁同步电机鲁棒性模型预测控制算法[J].电机与控制应用,2025,52(5):562-571,10.

基金项目

国家自然科学基金项目(61603263)National Natural Science Foundation of China(61603263) (61603263)

电机与控制应用

1673-6540

访问量0
|
下载量0
段落导航相关论文