高压物理学报2025，Vol.39Issue(6)：46-54,9.DOI:10.11858/gywlxb.20240958
超压与冲量综合作用下金属薄板的塑性变形特性分析与建模
Analysis and Modeling of Plastic Deformation Characteristics of Sheet Metal under the Combined Action of Overpressure and Impulse
商贵昊 1商飞 1潘正伟1
作者信息
- 1. 南京理工大学机械工程学院,江苏 南京 210094
- 折叠
摘要
Abstract
The current research of shock wave pressure testing based on plastic deformation neglects the combined effect of overpressure peak and impulse on metal sheet,and the application range of the model is limited.To solve the above problems,the simulation analysis of three typical metal plates with different thicknesses and diameters under different impact loads is carried out,and the positive and negative correlations between the deformation of the plates and overpressure,impulse,diameter and thickness are revealed.Considering the influence of overpressure and impulse on thin plate deformation,the relationship model of deflection of circular plate deformation-overpressure/impulse is established by using dimensional analysis method.The verification test data show that the average error of the model is 4.84%,which meets the requirement of test accuracy in explosion field and can be used for actual shock wave test.The research provides an effective test method and accurate data support for the evaluation of shock wave damage power of high energy warhead.关键词
冲击波压力测试/金属薄板/塑性变形/量纲分析Key words
shock wave pressure test/metal sheet/plastic deformation/dimensional analysis分类
力学引用本文复制引用
商贵昊,商飞,潘正伟..超压与冲量综合作用下金属薄板的塑性变形特性分析与建模[J].高压物理学报,2025,39(6):46-54,9.
