烟草科技2025，Vol.58Issue(6)：63-74,12.DOI:10.16135/j.issn1002-0861.2024.0522
烟支设计相关因素对卷烟燃烧锥长度的影响
Influence of cigarette design parameters on length of cigarette combustion cone
摘要
Abstract
To study the influence of cigarette design parameters on cigarette combustion cone length,the main combustion cone indexes were measured using an imaging method.The effects of cigarette design-related parameters on combustion cone length,such as cut tobacco weight per cigarette,cigarette paper permeability,filter ventilation rate and filter rod draw resistance were analyzed using single-factor and orthogonal tests.The results showed that the combustion cone length increased rapidly in the early stages of smoking,and then decreased gradually after reaching its maximum.Cut tobacco weight per cigarette,cigarette paper permeability,filter ventilation rate and filter rod draw resistance affected the maximum length and volume of the combustion cone.The orthogonal test revealed that the cut tobacco weight per cigarette and filter ventilation rate were the primary factors influencing the maximum combustion cone length.Using brand A(84.0 mm×24.2 mm)cigarettes as an example,the maximum combustion cone length was the shortest when the cut tobacco weight per cigarette was 0.64 g,the cigarette paper permeability was 50 CU,the filter ventilation rate was 20%,and the filter rod draw resistance was 3 150 Pa/120 mm.This experimental study elucidated the influence of cigarette design-related factors on combustion cone length to a certain extent,offering a correlation reference for optimizing cigarette design.关键词
烟丝单支质量/卷烟纸透气度/滤嘴通风率/滤棒吸阻/燃烧锥长度Key words
Cut tobacco weight per cigarette/Cigarette paper permeability/Filter ventilation rate/Draw resistance of filter rod/Length of combustion cone分类
轻工业引用本文复制引用
周显升,尚斌,葛倩,张豪洋,周静,付立伟,郭鹏,齐萌,魏玉磊..烟支设计相关因素对卷烟燃烧锥长度的影响[J].烟草科技,2025,58(6):63-74,12.基金项目
山东中烟工业有限责任公司科技项目"烟支设计相关因素对卷烟抽吸掉头的影响研究"(201302010). （201302010）
