中国烟草学报2025，Vol.31Issue(3)：31-38,8.DOI:10.16472/j.chinatobacco.2024.T0215
卷烟接装纸粘唇强度建模及其应用研究
Modeling of lip sticking degree of cigarette tipping paper and its application research
摘要
Abstract
To quickly and accurately determine the adhesive degree of cigarette tipping paper to lips,a model prediction method of cigarette paper lip adhesion degree was proposed.A peel strength tester was used to measure the adhesion force between various cigarette papers and artificial lips bonded with artificial saliva.The measured values were compared with human sensory evaluation.Through comparison and optimization,the experimental conditions were determined as follows:medical-grade silicone was selected as the artificial lip;artificial saliva containing bioactive components such as proteins,enzymes,and inorganic salts was prepared;the bonding length between the cigarette paper and the lip was 10 mm,with a bonding area of 150 mm2,tensile speed of 50 mm/min,artificial saliva volume of 6 μL,and a standing time of 1 min.The lip-sticking degree of tipping paper was strongly correlated with its friction coefficient.Therefore,a prediction model for lip-sticking degree was developed using the dynamic friction coefficient.The predicted values were largely consistent with the measured values,with a coefficient of determination(R²)of 0.97 between predicted and observed values and a normalized root mean square error(nRMSE)of 6.4-7.26％.These results indicate that the model is accurate and reliable.This method allows for the quick,convenient,and quantitative determination of the lip-sticking degree of tipping paper,eliminating the influence of subjective factors and variations in panel sensory evaluation.关键词
接装纸/粘唇强度/剥离强度测试仪/动态摩擦系数测定仪/剥离力/人造唇皮Key words
cigarette tipping paper/lip sticking degree/peel strength tester/sliding friction coefficient tester/peel force/artificial mouth skin引用本文复制引用
杨继,李振杰,杨玺,尹志豇,郭丽娟,张涛,田然,范多青,叶灵,王浩,唐石云..卷烟接装纸粘唇强度建模及其应用研究[J].中国烟草学报,2025,31(3):31-38,8.基金项目
云南中烟工业公司技术中心专项项目"卷烟接装纸粘唇力测定—动态摩擦力法"(2024ZK01) （2024ZK01）
