| 注册
首页|期刊导航|钻井液与完井液|井壁强化承压防漏技术模拟实验研究

井壁强化承压防漏技术模拟实验研究

吴春林 文明 邱正松

钻井液与完井液2025,Vol.42Issue(3):318-323,6.
钻井液与完井液2025,Vol.42Issue(3):318-323,6.DOI:10.12358/j.issn.1001-5620.2025.03.006

井壁强化承压防漏技术模拟实验研究

Simulation Experiment Study on Lost Circulation Control by Borehole Wall Strengthening

吴春林 1文明 2邱正松3

作者信息

  • 1. 四川长宁天然气开发有限责任公司,成都 610050
  • 2. 中国石油西南油气田分公司,成都 610051
  • 3. 中国石油大学(华东)石油工程学院,山东 青岛 266580
  • 折叠

摘要

Abstract

Laboratory simulation study was conducted on the strengthening of borehole walls to try to find a way of dealing with lost circulation under pressure and to reveal the micro-mechanisms of fracture plugging to strengthen the borehole walls.By comprehensively considering the effects of the closure pressure of fractures on their openings during borehole wall strengthening,a set of experiment apparatus was developed and a method for evaluating the plugging of fractures with variable openings established.Used with the apparatus and the evaluation method,two quantitative evaluation indicators,which are maximum plugging differential pressure and equivalent plugging position,were proposed.Compared with the commonly used particle size matching criterion,using the revised normal distribution particle size matching criterion,the pressure bearing capacity of a borehole wall can be increased by 2.36 times at most.Equivalent plugging position is inversely proportional to pressure bearing capacity,and the revised normal distribution continuous particle size matching criterion can form at the entry of fractures a thin and dense plugging layer.Increase the strength of the plugging materials to a level as high as possible,the effect of the well pressure fluctuation can be reduced;increase the elasticity of the borehole wall strengthening plugging agents,the adaptability of the plugging layer to the dynamic fractures can be improved.Moreover,appropriately increasing the suspension stability of the plugging system and reasonably reducing its injection rate both are beneficial to the formation of the pressure bearing plugging layer and to the improvement of borehole wall strengthening.

关键词

井壁强化/承压封堵机理/可变裂缝模拟实验/井漏预防

Key words

Borehole wall strengthening/Mechanisms of fracture plugging under pressure/Variable fracture simulation experiment/Lost circulation prevention

分类

石油、天然气工程

引用本文复制引用

吴春林,文明,邱正松..井壁强化承压防漏技术模拟实验研究[J].钻井液与完井液,2025,42(3):318-323,6.

基金项目

中石油股份公司攻关性应用性科技专项"页岩气规模增储上产与勘探开发技术研究"(2023ZZ21YJ02). (2023ZZ21YJ02)

钻井液与完井液

OA北大核心

1001-5620

访问量0
|
下载量0
段落导航相关论文