| 注册
首页|期刊导航|复合材料科学与工程|平纹CF/PEEK热塑性复合材料高温高应变率压缩失效机理

平纹CF/PEEK热塑性复合材料高温高应变率压缩失效机理

于鑫涛 张发 高鑫 张旭 潘忠祥 曹淼

复合材料科学与工程Issue(5):1-14,49,15.
复合材料科学与工程Issue(5):1-14,49,15.DOI:10.19936/j.cnki.2096-8000.20250528.001

平纹CF/PEEK热塑性复合材料高温高应变率压缩失效机理

High-temperature high strain rate compression failure mechanism of plain weave CF/PEEK thermoplastic composite materials

于鑫涛 1张发 2高鑫 1张旭 1潘忠祥 1曹淼3

作者信息

  • 1. 浙江理工大学 纺织科学与工程学院(国际丝绸学院),杭州 310018
  • 2. 中国商用飞机有限责任公司 北京民用飞机技术研究中心,北京 102211
  • 3. 嘉兴学院 材料与纺织工程学院,嘉兴 314001
  • 折叠

摘要

Abstract

This paper proposed a method based on multiscale mechanics to predict the impact mechanical re-sponse and failure mechanism of plain weave CF/PEEK composite materials under high-temperature and high strain rate conditions.Firstly,finite element models at micro,meso,and macro scales were established based on the real geometric structure and spatial distribution of fibers,fiber bundles,and matrix in the composite materials.A micro-mechanical model was developed based on the typical spatial distribution of fibers within the solidified fiber bundles,and extended to the meso scale to predict the failure modes of fiber bundles under different loading conditions using periodic boundary conditions.Secondly,a meso scale plain weave structure unit cell model was established to obtain the mechanical properties of single-layer plates in the composite materials,and an equivalent connection between microstructure and macro scale performance was established.Finally,temperature field and dynamic compression performance parameters are tested,and a homogeneous model similar to macro specimens is created to verify the ef-fectiveness of the model by comparing with experimental results.Meanwhile,the impact mechanical response and failure modes of the pre-tested specimens were analyzed to reveal the dynamic compression effects of plain weave CF/PEEK thermoplastic composite materials under coupled temperature field conditions.This study provides valuable reference for the safe service of thermoplastic composite materials in extreme environments.

关键词

热塑性复合材料/压缩/应变速率效应/温度效应/多尺度建模

Key words

thermoplastic composite materials/compression/strain rate effect/temperature effect/multi-scale modeling

引用本文复制引用

于鑫涛,张发,高鑫,张旭,潘忠祥,曹淼..平纹CF/PEEK热塑性复合材料高温高应变率压缩失效机理[J].复合材料科学与工程,2025,(5):1-14,49,15.

基金项目

国家自然科学基金(52075498,12102144) (52075498,12102144)

复合材料科学与工程

OA北大核心

2096-8000

访问量4
|
下载量0
段落导航相关论文