电工技术学报2025，Vol.40Issue(12)：3702-3715,14.DOI:10.19595/j.cnki.1000-6753.tces.240847
考虑线圈参数变化的失谐型无线电能传输系统抗偏移方法
Anti-Misalignment Method of Detuned Wireless Power Transfer System Considering Coil Parameters Variations
摘要
Abstract
Wireless power transfer(WPT)technology provides an effective way to solve the problem of stable power supply for rotating equipment.However,in practical applications,the relative misalignment between the rotating side and the stationary side is inevitable.In the practical application of WPT system,due to the presence of ferrite cores,the misalignment of the coupling mechanism will significantly affect the self-inductance and mutual inductance parameters of the coils,resulting in output power fluctuations and efficiency reduction.In order to enhance the anti-misalignment capability of WPT systems under changes in coil parameters,this paper proposes a detuned WPT system anti-misalignment method that considers changes in coil parameters.The detuned WPT system is constructed using changes in coil self-inductance to counteract the output power fluctuations caused by changes in mutual inductance. Firstly,using the finite element simulation software,the parameter variation laws of the rotary coupling mechanism under axial and radial offsets were summarized.The study found that the self-inductance and mutual inductance of the coupling mechanism have the same trend of change,and the degree of change is similar within a certain offset range.And based on this,the idea of using self-inductance changes to dynamically adjust the degree of system detuning to offset output fluctuations caused by mutual inductance changes was proposed. Secondly,the influence of parameter changes on system operation was obtained through circuit analysis,and the constant voltage output conditions for the degree of receiver detuning and mutual inductance changes were derived,providing a theoretical basis for the coupling mechanism design and compensation parameters optimization.The coupling mechanism design revolves around the number of turns on the secondary side,and the compensation parameters optimization is based on the particle swarm optimization(PSO)algorithm.With the goal of constant output and efficiency improvement,the compensation topology parameters of the inductor-capacitor-capacitor-series(LCC-S)are comprehensively optimized to achieve good axial and radial anti-misalignment capabilities of the rotary WPT system. Finally,a 170 W experimental setup was constructed to validate the effectiveness of the proposed method.The experimental results show that within the range of axial offset±30 mm and radial offset±5 mm,the maximum mutual inductance change of the rotary coupling mechanism is 74％,the self-inductance change is 48％,and the coupling coefficient is 0.39 to 0.89.The maximum output voltage fluctuation is only 9.5％(axial)and 2.8％(radial),and the maximum efficiency of the system is 93％.This method utilizes the equilibrium characteristic of the parameter changes for the coupling mechanism itself.Its significant advantages lie in simple and effective structure,no DC-DC converter,no communication and closed-loop control,and a more stable and reliable system.It is particularly suitable for WPT system in harsh environments such as high temperature,high voltage,and high-frequency vibration underground,reducing the failure rate of the system and improving power supply reliability.关键词
无线电能传输/参数变化/抗偏移/失谐/粒子群优化算法Key words
Wireless power transfer(WPT)/parameters variations/anti-misalignment/detuning/particle swarm optimization(PSO)algorithm分类
动力与电气工程引用本文复制引用
贾亚辉,陈丰伟,王智慧,苏玉刚,李杨..考虑线圈参数变化的失谐型无线电能传输系统抗偏移方法[J].电工技术学报,2025,40(12):3702-3715,14.基金项目
国家自然科学基金资助项目(62073246). （62073246）
