机电工程技术2025，Vol.54Issue(11)：181-186,6.DOI:10.3969/j.issn.1009-9492.2025.11.034
基于微元法的弹簧电缆自动收线技术研究
Research on Automatic Wire Collection Technology of Spring Wire Based on Micro-element Method
段海军 1王桂花 1姜渝 1田贵川 1官平1
作者信息
- 1. 重庆华伟工业(集团)有限责任公司,重庆 400700
- 折叠
摘要
Abstract
Spring wire is an emerging automatic wire collection material in the lifter industry in recent years.Currently,there is little theoretical and in-depth systematic research.The requirements for deformation,maximum shear stress,and pitch diameter were proposed,the tension spring is the key research object.The commonly used linear spring analysis method considers the spring as an ideal spring,which cannot analyze the tension spring with stretched and subjected to linear load,and does not calculate the pitch diameter.Using the method of combining micro-element with limits,based on the linear characteristic of the spring under line load,the determination formula for whether the spring wire undergoes axial deformation and the calculation formula for axial deformation at any position are derived.Furthermore,the maximum shear stress of the stretched spring and the approximate pitch diameter calculation formula for each coil are derived.The research process and results were demonstrated through practical cases,and the correctness of the research method was verified through actual measurement of the pitch diameter during project implementation and analysis of the maximum shear stress using ANSYS Workbench finite element software.Solved the theoretical calculation problem of spring wire,provided reference for designing spring wire,and provided reference for analyzing springs that can withstand similar loads.关键词
弹簧电缆/拉伸弹簧/最大切应力/中径/微元法/ANSYS WorkbenchKey words
spring wire/tension spring/maximum shear stress/pitch diameter/micro-element method/ANSYS Workbench分类
机械工程引用本文复制引用
段海军,王桂花,姜渝,田贵川,官平..基于微元法的弹簧电缆自动收线技术研究[J].机电工程技术,2025,54(11):181-186,6.
