中国塑料2025，Vol.39Issue(6)：100-104,5.DOI:10.19491/j.issn.1001-9278.2025.06.017
聚合物复合材料连续强制组装加工设备分级辊压装置结构设计
Structural design of graded roller pressing device for continuous forced assembly processing equipment of polymer composites
仇思源 1王文昊 1陈元民 1李亚娇 1郑秀婷 1许红 1吴大鸣 1孙靖尧1
作者信息
- 1. 北京化工大学机电工程学院,北京 100029
- 折叠
摘要
Abstract
Continuous roll-spatial confining forced network assembly(CR-SCFNA)innovatively reengineers the tradition-al flat-plate hot-pressing method into a dynamic"flexible roll-to-plate"process.By integrating the mechanical force of rollers with the intrinsic self-assembly behavior of fillers,CR-SCFNA synergistically drives the formation of a high-densi-ty filler network.The system employs a graded roller press that progressively compresses the composite material to align with the dimensional specifications of the limit plate.Experimental results demonstrated that applying forced assembly forces,specifically radial compression combined with orthogonal shear forces,enabled precise alignment and directional organization of fillers within the polymer matrix.This created a densely interconnected thermally/electrically conductive network.This breakthrough process significantly enhances the thermal and electrical conductivity of polymer compos-ites,addressing the growing industrial demand for lightweight,high-performance materials in applications such as elec-tronics,energy systems,and advanced manufacturing.关键词
连续强制组装/分级辊压装置/连续化生产/填料网络/设备设计Key words
continuous forced assembly/graded roller press/continuous production/packing network/equipment design分类
化学工程引用本文复制引用
仇思源,王文昊,陈元民,李亚娇,郑秀婷,许红,吴大鸣,孙靖尧..聚合物复合材料连续强制组装加工设备分级辊压装置结构设计[J].中国塑料,2025,39(6):100-104,5.
