机械制造与自动化2025，Vol.54Issue(3)：234-241,8.DOI:10.19344/j.cnki.issn1671-5276.2025.03.045
共形天线表面贴片压力柔顺控制方法
Mounting Pressure Compliance Control Method for Conformal Antenna
摘要
Abstract
Mounting pressur,being one of critical process parameters affecting the mounting quality of the surface patch resistance of the conformal antenna,its improper control,considering the small-sized patch resistor and narrow gap between the pads,may cause the installation to deviate and even damage the conformal antenna,seriously affecting product performance.To meet the requirements of compliant pressure control in the conformal antenna mounting process,the process of changing the contact force is analyzed,and a second-order"mass-damping-spring"system is constructed between the end of the patch and the conformal antenna substrate.A mounting pressure controller is designed based on the admittance control strategy,and the improved firework algorithm is applied to optimize the inertia parameters,damping parameters and stiffness parameters of the admittance control,whose effectiveness is verified by modeling,simulation and practical experiments.关键词
共形天线/贴片压力/导纳控制/烟花算法/参数优化Key words
conformal antenna/mounting pressure/admittance control/firework algorithm/parameter optimization分类
信息技术与安全科学引用本文复制引用
李可,杜小东,王长瑞,田威,邓超,丁忆凡,王子航..共形天线表面贴片压力柔顺控制方法[J].机械制造与自动化,2025,54(3):234-241,8.基金项目
国家重点研发计划项目(2020YFB1710300) （2020YFB1710300）
国防科工局国防基础科研计划项目(JCKY2019210B004) （JCKY2019210B004）
