| 注册
首页|期刊导航|中国机械工程|带钢平整过程中C翘机理及治理策略

带钢平整过程中C翘机理及治理策略

杨永辉 张冀 谭海龙 牛百草 白振华

中国机械工程2025,Vol.36Issue(6):1345-1351,7.
中国机械工程2025,Vol.36Issue(6):1345-1351,7.DOI:10.3969/j.issn.1004-132X.2025.06.022

带钢平整过程中C翘机理及治理策略

C-warping Mechanism and Treatment Strategies in Leveling Processes of Strip Steels

杨永辉 1张冀 1谭海龙 1牛百草 1白振华2

作者信息

  • 1. 燕山大学国家冷轧板带装备及工艺工程技术研究中心,秦皇岛,066004
  • 2. 燕山大学国家冷轧板带装备及工艺工程技术研究中心,秦皇岛,066004||燕山大学亚稳材料制备技术与科学国家重点实验室,秦皇岛,066004||燕山大学深圳研究院,深圳,518055
  • 折叠

摘要

Abstract

In order to solve the problems of C-warping defects in strip steels in the leveling proces-ses,the processing parameters in the strip leveling processes were optimized,and a set of C-warping prediction and treatment strategies for strip steels were developed.The formation mechanism of C-warping was analyzed from three aspects:rolling,processing lubrication systems and the influences of anti-wrinkle rollers and anti-trembling rollers on the forces of strip steels.The stress distribution of the horizontal direction of the outlet strips in the thickness was obtained,based on the stress analysis of the strips under the assumption of half-plane infinite body,the maximum and minimum transverse elongation in the thickness direction of the strips were obtained,and the height of the C warp of the strips was obtained through the geometric relationship.A set of optimal height settings of anti-wrinkle rollers and anti-trembling rollers were sought to minimize the objective function of the comprehensive control,and the elongation in the direction of strip thickness was controlled,so as to reduce C-warp.The model and treatment strategies were applied to a leveling unit in China,and the prediction errors of C warping height are controlled within 10%,and the maximum warpage ranges of the unit are re-duced from 1.4~6.5 mm to 0.9~4.5 mm.The results show that the C warpage prediction and treat-ment strategy meet the production demands,and the warpage values are significantly reduced,which reduces the repair rate caused by warpages.

关键词

带钢/平整/防皱辊/防颤辊/横向延伸/C翘

Key words

strip steel/leveling/anti-wrinkle roller/anti-tembling roller/transverse extension/C-warp

分类

矿业与冶金

引用本文复制引用

杨永辉,张冀,谭海龙,牛百草,白振华..带钢平整过程中C翘机理及治理策略[J].中国机械工程,2025,36(6):1345-1351,7.

基金项目

河北省自然科学基金重点项目(E2024203125) (E2024203125)

河北省科学技术研究与发展计划—科技支撑计划(23280101Z) (23280101Z)

河北省高等学校科学技术研究(CXY2023012) (CXY2023012)

河北省重大科技成果转化专项(22281001Z) (22281001Z)

辽宁省教育厅高等学校基本项目(LJKZZ20220040) (LJKZZ20220040)

中央引导地方科技发展资金(236Z1024G) (236Z1024G)

中国机械工程

OA北大核心

1004-132X

访问量0
|
下载量0
段落导航相关论文