| 注册
首页|期刊导航|南京航空航天大学学报(英文版)|大变形飞机全机静力试验最优位姿研究

大变形飞机全机静力试验最优位姿研究

郑建军 金峰 刘玮 张易明 郭琼

南京航空航天大学学报(英文版)2025,Vol.42Issue(3):354-367,14.
南京航空航天大学学报(英文版)2025,Vol.42Issue(3):354-367,14.DOI:10.16356/j.1005-1120.2025.03.007

大变形飞机全机静力试验最优位姿研究

Research on Optimal Attitude of Large Deformation Airplane in Full-Scale Aircraft Static Test

郑建军 1金峰 2刘玮 3张易明 4郭琼3

作者信息

  • 1. 西安交通大学航天航空学院机械结构强度与振动国家重点实验室,西安 710049,中国||中国飞机强度研究所强度与结构完整性全国重点实验室,西安 710065,中国
  • 2. 西安交通大学航天航空学院机械结构强度与振动国家重点实验室,西安 710049,中国
  • 3. 中国飞机强度研究所强度与结构完整性全国重点实验室,西安 710065,中国
  • 4. 复旦大学航空航天系,上海 200433,中国
  • 折叠

摘要

Abstract

The accuracy of the full-scale aircraft static tests is greatly influenced by the aircraft attitude.This paper proposes an aircraft attitude optimization method based on the characteristics of the test.The aim is to address three typical problems of attitude control in the full-scale aircraft static tests:(1)The coupling of rigid-body displacement and elastic deformation after large deformation,(2)the difficulty of characterizing the aircraft attitude by measurable structure,and(3)the insufficient adaptability of the center of gravity reference to complex loading conditions.The methodology involves the establishment of two observation coordinate systems,a ground coordinate system and an airframe coordinate system,and two deformation states,before and after airframe deformation.A subsequent analysis of the parameter changes of these two states under different coordinate systems is then undertaken,with the objective being to identify the key parameters affecting the attitude control accuracy of large deformation aircraft.Three optimization objective functions are established according to the test loading characteristics and the purpose of the test:(1)To minimize the full-scale aircraft loading angle error,(2)to minimize the full-scale aircraft loading additional load,and(3)to minimize the full-scale aircraft loading wing root additional bending moment.The optimization calculation results are obtained by using the particle swarm optimization algorithm,and the typical full-scale aircraft static test load condition of large passenger aircraft is taken as an example.The analysis of the results demonstrates that by customizing the measurable structure of the aircraft as the observation point for the aircraft attitude,and by obtaining the translational and rotational control parameters of the observation point during the test based on the optimization objective function,the results are reasonable,and the project can be implemented and used to control the aircraft's attitude more accurately in complex force test conditions.

关键词

全尺寸飞机/静力试验/大变形/位姿优化/姿态控制

Key words

full-scale aircraft/static test/large deformation/position optimization/attitude control

分类

航空航天

引用本文复制引用

郑建军,金峰,刘玮,张易明,郭琼..大变形飞机全机静力试验最优位姿研究[J].南京航空航天大学学报(英文版),2025,42(3):354-367,14.

基金项目

This work was supported in part by the National Specialized Research Project(No.XXZ3-XX21-3). (No.XXZ3-XX21-3)

南京航空航天大学学报(英文版)

1005-1120

访问量0
|
下载量0
段落导航相关论文