土木与环境工程学报（中英文）2025，Vol.47Issue(4)：66-77,12.DOI:10.11835/j.issn.2096-6717.2023.063
基于截面分类的U形钢-混凝土组合梁外包钢板件宽厚比限值
Width-thickness ratio limit of outer steel plate of steel-concrete composite beam with U-section based on section classification
摘要
Abstract
In order to study the plate width-thickness ratio limits of steel palte based on section classification for Steel-Concrete Composite Beam with U-section(SCBU),monotonic static loading tests were conducted on five TSCU specimens.The damage modes,load-displacement curves and plastic deformation capacities of SCBU with different combinations of height-thickness ratios of outer steel-encased web in compression area and width-thickness ratios of compressed flange were analyzed.The testing results show that the width-thickness ratio of the steel plate has a direct influence on the buckling deformation and plastic deformation capacity of the SCBU.All the specimens suffered local buckling before reaching the peak bearing capacity,the failure mode was bending plastic damage.Meanwhile,the finite element analysis results show that the nonlinear behavior between the steel plate web and compressed flange interacts with each other,the buckling moment of the plate advances with the increase of width-thickness ratio of the adjacent plate,and the degree of plastic development of the SCBU decreases with the increase of width-thickness ratio of steel plate.Based on the results of the test and finite element parametric analysis,the recommended limit value of width-thickness ratio for class Ⅱ section(Class 2)steel palte of SCBU is proposed,and the proposed limit is compared and analyzed with the code limit,and the results show that this limit value is more consistent with the real force performance of the SCBU and could give fuller play to its structural advantages to a certain extent.关键词
U形钢-混凝土组合梁/截面分类/宽厚比/试验研究/有限元分析Key words
steel-concrete composite beam with U-section(SCBU)/section classification/width-thickness ratio/experimental study/finite element analysis分类
建筑与水利引用本文复制引用
程睿,余元林,章珈瑜,张青峰..基于截面分类的U形钢-混凝土组合梁外包钢板件宽厚比限值[J].土木与环境工程学报（中英文）,2025,47(4):66-77,12.基金项目
国家重点研发计划(2016YFC0701506) National Key R&D Program(No.2016YFC0701506) （2016YFC0701506）
