| 注册
首页|期刊导航|煤气与热力|冷水盘管对主动式冷梁性能的影响模拟研究

冷水盘管对主动式冷梁性能的影响模拟研究

王奉刚 郑文科 胡北 郭吉伟 姜益强 孙澄

煤气与热力2025,Vol.45Issue(7):22-29,8.
煤气与热力2025,Vol.45Issue(7):22-29,8.

冷水盘管对主动式冷梁性能的影响模拟研究

Simulation Study on Influence of Cooling Coils on Performance of Active Chilled Beams

王奉刚 1郑文科 1胡北 2郭吉伟 1姜益强 1孙澄1

作者信息

  • 1. 哈尔滨工业大学建筑与设计学院,黑龙江 哈尔滨 150001||寒地城乡人居环境科学与技术工业和信息化部重点实验室,黑龙江哈尔滨 150090
  • 2. 中国核电工程有限公司,北京 100840
  • 折叠

摘要

Abstract

A numerical simulation model of square chilled beams with dual-layer cooling coils was devel-oped to investigate the effects of coil dimensions(di-ameter,horizontal pitch,and vertical spacing)on cool-ing capacity and induction ratio using Fluent software.The coil diameter has minimal impact on induction ra-tio,though increasing it from 10 mm to 20 mm reduces induced air outlet temperature by 1.50%and beam out-let temperature by 5.25%,while achieving maximum cooling capacity at 20 mm diameter(5.77%increase versus 10 mm diameter).Horizontal pitch expansion(30 mm to 70 mm)increases both outlet temperatures(4.82%and 5.72%respectively)with a 7.3%cooling capacity reduction,despite slight induction ratio im-provement.As the vertical spacing increases from 20 mm to 60 mm,the induced air outlet temperature first increases and then decreases,and the induction ratio first increases and then decreases.Optimal vertical spacing(40 mm)yields peak temperatures and induc-tion ratio,whereas 60 mm spacing produces the lowest values,with cooling capacity gradually decreasing throughout the spacing range.The simulation deter-mines that maximum cooling performance can be achieved with 20 mm coil diameter,30 mm horizontal pitch,and 40 mm vertical spacing under the studied conditions.

关键词

主动式冷梁/冷水盘管/数值模拟/制冷量/诱导比

Key words

active chilled beam/cooling coil/numerical simulation/cooling capacity/induction ratio

分类

建筑与水利

引用本文复制引用

王奉刚,郑文科,胡北,郭吉伟,姜益强,孙澄..冷水盘管对主动式冷梁性能的影响模拟研究[J].煤气与热力,2025,45(7):22-29,8.

煤气与热力

1000-4416

访问量0
|
下载量0
段落导航相关论文