塑料科技2025，Vol.53Issue(7)：25-29,5.DOI:10.15925/j.cnki.issn1005-3360.2025.07.005
PA6/GB/GF共混物的选择性激光烧结性能研究
Performance Study of Selective Laser Sintering for PA6/GB/GF Composites
摘要
Abstract
Fiber laser,as a novel alternative light source for selective laser sintering(SLS)technology,demonstrates superior beam quality and stability compared to CO2 lasers,while enhancing processing efficiency.In the study,fiber laser was employed as the light source in SLS to prepare blended powder of nylon 6/glass beads/glass fibers(PA6/GB/GF).Comprehensive characterization and analysis were conducted by the morphology,DSC temperature curves,crystal structure,and particle size of the composite.By initially exploring the SLS process parameters and combining the mechanical properties and fracture morphologies of sintered specimens under different laser powers,a comprehensive evaluation was conducted.The optimal process parameters for PA6/GB/GF blends in fiber laser SLS processing were determined to be:Preheating temperature of 208℃,laser power of 130 W,scanning spacing of 0.40 mm,and layer thickness of 0.15 mm.Under these conditions,the tensile strength of the composite specimens reached a maximum of 69.50 MPa.关键词
尼龙6/玻璃微珠/玻璃纤维/选择性激光烧结/拉伸强度Key words
Nylon 6/Glass beads/Glass fibers/Selective laser sintering/Tensile strength分类
化学化工引用本文复制引用
邓正东,金叶,高唯,孙茂银,梁寅,吴健..PA6/GB/GF共混物的选择性激光烧结性能研究[J].塑料科技,2025,53(7):25-29,5.基金项目
贵州科学院青年科学基金(黔科院J字[2024]7号、黔科院J字[2024]2号、黔科院J字[2024]4号) （黔科院J字[2024]7号、黔科院J字[2024]2号、黔科院J字[2024]4号）
贵州省科技计划项目(黔科合服企[2022]006) （黔科合服企[2022]006）
贵州省科技计划项目(黔科合支撑[2023]一般350) （黔科合支撑[2023]一般350）
贵阳市科技计划项目(筑科合同[2023]8-3号) （筑科合同[2023]8-3号）
