船电技术2025，Vol.45Issue(8)：6-8,3.
船舶进水阀箱滤器堵塞状态监测装置的设计与实现
Design and realization of the monitoring device for the clogging status of ship inlet valve box filter
陈学文 1周引平 1石锋1
作者信息
- 1. 长江三峡通航管理局,湖北 宜昌 443000
- 折叠
摘要
Abstract
Aiming at the major safety hazards such as insufficient pressure of cooling water and fire fighting water caused by filter clogging in the water inlet valve box of a ship,and stopping of the main engine,and realizing the timely cleaning of the filter in the water inlet valve box of a ship to prevent the equipment failure and fire fighting safety hazards,this paper analyzes the working modes and deficiencies of the two traditional methods of internal and external pressure difference detection and the static pressure detection method inside the filter,and proposes a monitoring device for filter clogging status in the water inlet valve box of a ship.This paper analyzes the working mode and deficiencies of the two traditional measurement methods of internal and external pressure difference detection and static pressure detection inside the filter,and proposes a water inlet valve box filter clogging state monitoring device,which through the reasonable application of multi-factor dynamic modeling method,has the advantages of simple measurement method,precise filter clogging state mastery,and low influence of the ship's driving state.At the same time,the vacuum pressure sensor and range meter can conveniently obtain the corresponding vacuum degree and water speed,and grasp the corresponding blockage rate,so as to realize the goal of improving the safety of ship navigation.关键词
进水阀箱滤器/堵塞状态/监测装置Key words
inlet valve box filter/blocked state/monitoring device分类
交通工程引用本文复制引用
陈学文,周引平,石锋..船舶进水阀箱滤器堵塞状态监测装置的设计与实现[J].船电技术,2025,45(8):6-8,3.
