理化检验-物理分册2025，Vol.61Issue(7)：1-5,10,6.DOI:10.11973/lhjy-wl250045
航空发动机滚动轴承疲劳试验磨损状态监测
Aero-engine rolling bearing fatigue test wear condition monitoring
苗慧慧 1曹桂松 1石凤仙1
作者信息
- 1. 中国航发商用航空发动机有限责任公司,上海 200241
- 折叠
摘要
Abstract
The wear particle samples in the oil and magnetic blockage during the fatigue test of aviation rolling bearings were collected,and the lubricating oil and wear particle samples were analyzed.At the same time,the wear state of the bearing was monitored by combining the wear state and vibration data of the test piece.The results show that the content change trend of Fe element in the test cycle was the most obvious,which was an effective element to monitor the wear of bearings.The morphology characteristics of bearing fatigue wear particles were mainly irregular flakes with flat and bright surface.The particle size and the number of particles increased with the extension of test time.In the actual wear monitoring,it was also necessary to combine spectral analysis with other technical means,such as energy spectrum analysis technology,to locate and find the wear site in time to avoid bearing failure.关键词
油液分析/疲劳试验/滚动轴承/磨损颗粒/状态监测Key words
oil analysis/fatigue test/rolling bearing/wear particle/condition monitoring分类
通用工业技术引用本文复制引用
苗慧慧,曹桂松,石凤仙..航空发动机滚动轴承疲劳试验磨损状态监测[J].理化检验-物理分册,2025,61(7):1-5,10,6.
