| 注册
首页|期刊导航|中国机械工程|分形互锁设计的皮肤缝合界面拉伸破坏行为研究

分形互锁设计的皮肤缝合界面拉伸破坏行为研究

徐林龙 纪小刚 李华彬 江昊

中国机械工程2025,Vol.36Issue(7):1442-1452,11.
中国机械工程2025,Vol.36Issue(7):1442-1452,11.DOI:10.3969/j.issn.1004-132X.2025.07.006

分形互锁设计的皮肤缝合界面拉伸破坏行为研究

Research on Tensile Failure Behaviors of Skin Suture Interfaces with Fractal Interlock Design

徐林龙 1纪小刚 2李华彬 1江昊1

作者信息

  • 1. 江南大学机械工程学院,无锡,214122
  • 2. 江南大学机械工程学院,无锡,214122||江苏省食品先进制造装备技术重点实验室,无锡,214122
  • 折叠

摘要

Abstract

In order to study the mechanism of the geometric structure of the wound interfaces on the tensile failure behaviors of the skin sutures,a fractal interlocking mechanism was developed based on the tensile failure behaviors of the skin suture interfaces.The fractal design of skin interface was carried out according to Koch interlock model,and the equivalent mechanics model was constructed for the interface with linear and sinusoidal center line distribution.Combined with numerical simula-tion and digital image correlation method,the tensile tests were carried out on the prepared suture structures,focusing on the progressive destructive behaviors of second-order tooth skin suture struc-tures,and the effects of tooth sharp angle,fractal order and center line distribution on their tensile properties were further explored.Finally,taking tensile strength as the evaluation index,the parame-ter mapping model of each sensitive factor was constructed.The results show that the failure behav-iors of the second order tooth interface are manifested as the load transfer from both sides of the tooth to the interface layer of the middle tooth,resulting in the uniform loss of the second order tooth.Smaller tooth angle and higher fractal order may improve the tensile properties of the skin interfaces,and the distribution of sinusoidal centerlines may make the structure have greater tensile strength.This paper may provide relevant reference for improving the healing rate of skin wound after clinical suture.

关键词

皮肤切口/缝合界面/界面力学/数字图像相关法

Key words

skin incision/suture interface/interface mechanics/digital image correlation method

分类

通用工业技术

引用本文复制引用

徐林龙,纪小刚,李华彬,江昊..分形互锁设计的皮肤缝合界面拉伸破坏行为研究[J].中国机械工程,2025,36(7):1442-1452,11.

基金项目

国家自然科学基金(52175234,51105175) (52175234,51105175)

江苏省"六大人才高峰"项目(JXQC-006) (JXQC-006)

中国机械工程

OA北大核心

1004-132X

访问量0
|
下载量0
段落导航相关论文