湖北文理学院学报2025，Vol.46Issue(8)：5-9,5.
基于布莱恩原则的机床直线度误差补偿方法研究
Method of Straightness Error Compensation for Machine Tool Based on Bryan Principle
摘要
Abstract
Due to the limitation of the machine tool structure,the measurement point and cutter location point do not coincide during the installation of the laser interferometer.The Bryan error calculation method is proposed to address measurement errors generated during the measurement process,and the straightness error models for machine tools are established in the X,Y and Z directions.It is analyzed that the mechanism of straightness error in machine tools.It is designed that the Bryan error compensation experiment.The experimental results show that the maximum straightness error generated is 2.8 um when the measurement point deviates from the tool position.The geometric error of the machine tool in all three directions has reduced through compensating the straightness error generated by measuring error.The average error has decreased by 15%after compensation.It is proved that compensating measurement error is effective in reducing the geometric error of machine tools.关键词
布莱恩误差/直线度测量/误差补偿/刀位点Key words
Bryan error/straightness measurement/error compensation/cutter location point分类
机械制造引用本文复制引用
刘宏伟,王新科,杨锐,郭永杰..基于布莱恩原则的机床直线度误差补偿方法研究[J].湖北文理学院学报,2025,46(8):5-9,5.基金项目
湖北文理学院科研基金项目(2024pygpzk06) （2024pygpzk06）
