| 注册
首页|期刊导航|强激光与粒子束|简单MOPA结构在1035nm波段实现2kW近单模输出

简单MOPA结构在1035nm波段实现2kW近单模输出

王鹏 杨成 吴函烁 叶云 奚小明 张汉伟 王小林 习锋杰

强激光与粒子束2025,Vol.37Issue(9):1-3,3.
强激光与粒子束2025,Vol.37Issue(9):1-3,3.DOI:10.11884/HPLPB202537.250287

简单MOPA结构在1035nm波段实现2kW近单模输出

Simple MOPA fiber laser achieved 2 kW near-single-mode output at 1035 nm

王鹏 1杨成 2吴函烁 1叶云 1奚小明 1张汉伟 1王小林 1习锋杰1

作者信息

  • 1. 国防科技大学前沿交叉学科学院,长沙 410073||国防科技大学南湖之光实验室,长沙 410073||高能激光技术湖南省重点实验室,长沙 410073
  • 2. 国防科技大学前沿交叉学科学院,长沙 410073
  • 折叠

摘要

Abstract

[Background]The 1035 nm short-wavelength-band fiber laser serves as a critically important light source with extensive and growing applications across numerous advanced technological fields.Its unique spectral properties make it highly suitable for spectral beam combining(SBC),nonlinear frequency conversion,and high-resolution lidar systems.However,the power scaling of 1035 nm fiber lasers has long been constrained by the amplified spontaneous emission(ASE)effect.This phenomenon has historically impeded significant progress,with the output power from conventional master oscillator power amplifier(MOPA)configurations remaining confined below 2 kW,creating a bottleneck for higher-performance applications.[Purpose]To realize high-power,high-brightness laser output in the 1035 nm band,we designed and constructed a counter-pumped MOPA fiber laser.[Methods]The system's performance was enhanced through multi-parameter optimization,including optimizing the temporal characteristics of the fiber seed source,the bending and coiling parameter of the gain fiber in the amplifier stage,and refining the backward pump scheme.[Results]Finally,when the seed laser power was 24 W and the total pump power was 2.9 kW,a maximum output power of over 2 kW was reached,and the corresponding optical-to-optical conversion efficiency of the amplifier stage was approximately 69.5%.At the maximum output power,the ASE suppression ratio was measured to be around 32 dB,indicating effective control over noise.Furthermore,the beam quality factors were measured to be M2x=1.33 and M2y=1.22,confirming near-diffraction-limited,single-mode operation,and high spatial beam quality.[Conclusions]The results represent a significant stride forward in the power scaling of high-brightness 1035 nm fiber lasers.Next research will focus on further elevating the output power and beam quality by implementing seed source with more stable temporal characteristics and optimizing the overall fiber laser structure to mitigate ASE and other nonlinear effects.

关键词

掺镱光纤激光器/短波光纤激光器/放大自发辐射

Key words

ytterbium-doped fiber laser/short-wavelength fiber laser/amplified spontaneous emission

分类

数理科学

引用本文复制引用

王鹏,杨成,吴函烁,叶云,奚小明,张汉伟,王小林,习锋杰..简单MOPA结构在1035nm波段实现2kW近单模输出[J].强激光与粒子束,2025,37(9):1-3,3.

基金项目

长沙市杰出创新青年培养计划项目(kq2406002) (kq2406002)

国防科技大学自主创新科学基金项目(25-ZZCX-XXXJS-3) (25-ZZCX-XXXJS-3)

国防科技大学自主科研项目(202301-XXGC-XX-045) (202301-XXGC-XX-045)

强激光与粒子束

OA北大核心

1001-4322

访问量0
|
下载量0
段落导航相关论文