中国标准化Issue(17)：219-223,5.DOI:10.3969/j.issn.1002-5944.2025.17.035
关于不同标准中甲醛释放量(气候箱法)试验方法的探究
Research on the Test Methods of Formaldehyde Emission(Chamber Method)in Different Standards
摘要
Abstract
The chamber method has become the main detection method of formaldehyde emission in wood-based panels and their products.Requirements on test specimen size,sample preparation positions,edge sealing treatment for formaldehyde emission in different standards are not exactly the same,which easily cause differences of test results.Through comparing different standards,the paper summarizes the preferred test principles of formaldehyde emission.The tests should be conducted based on the actual use conditions of the product,and the total exposed area of test specimen is 1 m2.For the wood-based panels and their products that are exposed on one side,only the exposed surface should be tested.For the wood-based panels and their products that are exposed on both sides,the total length of the unsealed edge of the panel should be 1500 mm,and the unsealed edge should be evenly distributed in each test specimen.关键词
甲醛释放量/气候箱法/试件尺寸/暴露面积/封闭处理Key words
formaldehyde emission/chamber method/test specimen size/exposed area/edge sealing treatment引用本文复制引用
李环亭,张艳艳,于富磊,程建伟,韩建敏,王萍,杨晓蕾,张晓阳,曾盼,贾红丽..关于不同标准中甲醛释放量(气候箱法)试验方法的探究[J].中国标准化,2025,(17):219-223,5.基金项目
本文受山东省市场监督管理局项目"油漆饰面胶合板检测研究与应用"(项目编号:sdscjgj2024bz05)资助. （项目编号:sdscjgj2024bz05）
