| 注册
首页|期刊导航|西安工程大学学报|多阴极交叉放电制备移动式微弧氧化涂层

多阴极交叉放电制备移动式微弧氧化涂层

陆海林 王泽臻 高浩 昝杰

西安工程大学学报2025,Vol.39Issue(5):93-99,7.
西安工程大学学报2025,Vol.39Issue(5):93-99,7.DOI:10.13338/j.issn.1674-649x.2025.05.011

多阴极交叉放电制备移动式微弧氧化涂层

Preparation of mobile micro-arc oxidation coatings by multi-cathode cross discharge method

陆海林 1王泽臻 1高浩 1昝杰1

作者信息

  • 1. 西安工程大学 机电工程学院,陕西 西安 710048
  • 折叠

摘要

Abstract

Aimed at the problems of low processing efficiency and poor film-forming uniformity existing in the current mobile micro-arc oxidation(MMAO)when processing large-area work-pieces,based on the preparation of MMAO films by combining multiple cathodes,a MMAO ma-chine was used to explore the coupling of discharge regions between multiple cathodes,so that coatings can grow in the intersecting regions.Multiple intersection regions were designed rational-ly to integrate multiple cathodes for preparing MMAO coatings with different properties.In the friction performance test,the strong breakdown voltage micro-arc oxidation(S)area coating and the strong-strong breakdown voltage micro-arc oxidation intersection(S-S)area coating showed no abrasion under 2 N load,and the average coefficient of friction of the S-S coating decreased by 0.060 9 compared with that of the S coating.In the electrochemical corrosion experiments,the corrosion potential of the S-S coating was 0.0481 6 V higher than the S coating by 0.0481 6 V.The S-S coating had superior corrosion resistance in S-S area than that of the S coating.Compared with other coatings,the capacitive arc radius of the coating in the S-S zone increased by approxi-mately 1-2 orders of magnitude,and superior corrosion resistance was obtained in the S-S zone.The tribological behavior of the better coatings and the coating formation mechanism under the influence of multiple discharge regions were explained.The results show that the S-S area coating has the advantages of homogeneous thickness,small friction coefficient and excellent corrosion re-sistance.This study provides guidance for the development of MMAO into the field of multiple discharge regions.

关键词

6061铝合金/多阴极移动微弧氧化/放电区耦合/耐磨性/耐腐蚀性

Key words

6061 aluminum alloy/multi-cathode mobile micro-arc oxidation/discharge zone cou-pling/wear resistance/corrosion resistance

分类

矿业与冶金

引用本文复制引用

陆海林,王泽臻,高浩,昝杰..多阴极交叉放电制备移动式微弧氧化涂层[J].西安工程大学学报,2025,39(5):93-99,7.

基金项目

陕西省自然科学基础研究项目(2023-JC-YB-288) (2023-JC-YB-288)

西安工程大学学报

1674-649X

访问量0
|
下载量0
段落导航相关论文