| 注册
首页|期刊导航|黑龙江科技大学学报|不同力系下滚筒截割煤岩载荷转换与关联性解算方法

不同力系下滚筒截割煤岩载荷转换与关联性解算方法

刘春生 王磊 申子祥 李德根

黑龙江科技大学学报2025,Vol.35Issue(5):782-789,8.
黑龙江科技大学学报2025,Vol.35Issue(5):782-789,8.DOI:10.3969/j.issn.2095-7262.2025.05.014

不同力系下滚筒截割煤岩载荷转换与关联性解算方法

Load conversion and correlation solving method for drum cutting coal-rock in different force systems

刘春生 1王磊 2申子祥 3李德根3

作者信息

  • 1. 黑龙江科技大学 机械工程学院,哈尔滨 150022||黑龙江科技大学 安全工程学院,哈尔滨 150022
  • 2. 黑龙江科技大学 安全工程学院,哈尔滨 150022
  • 3. 黑龙江科技大学 机械工程学院,哈尔滨 150022
  • 折叠

摘要

Abstract

Based on the insight that the cutting load of the drum is the basis for the design of shearers and the research on cutting performance,this paper proposes an integral-equivalence quantitative ratio algo-rithm for the load components between the drum and the cutting picks by studying the mathematical de-scriptions and mutual conversion methods of the load definitions under different force systems,and analy-zing the meanings of different definition forms of the shearer drum load.The study works by determining the value range of the load component ratio coefficients based on the theoretical analysis and numerical simula-tion of the loads of the drum and cutting picks;and establishing the relationship between the cutting pick-to-drum load component ratio and the types and arrangements of the cutting picks.The results show that the ratio coefficients Kcy and Kgy of the cutting load to the advancing load for chisel-shaped picks and the drum are both bigger than 1,with the theoretical relationship between them,Kgy=0.785 Kcyobtained through the integral-equivalent discrete summation algorithm,the ratio coefficient Kcy=1.8 to 2.0 by the numerical simulation experiment,and the ratio of the peak mean value of the drum cutting load to the peak mean val-ue of the advancing load Kgy=1.4 to 1.8 with an average of 1.56.The study verifies that the cutting load and the advancing load show a positive proportional relationship with the change of the cutting thickness,and significant differences exist in the ratio relationships of the load components under different types of cutting picks and different working conditions.

关键词

截割煤岩/滚筒载荷形式/载荷关联特性/解算方法

Key words

coal-rock cutting/drum load form/load correlation characteristics/solving method

分类

矿业与冶金

引用本文复制引用

刘春生,王磊,申子祥,李德根..不同力系下滚筒截割煤岩载荷转换与关联性解算方法[J].黑龙江科技大学学报,2025,35(5):782-789,8.

基金项目

国家自然科学基金项目(51274091) (51274091)

黑龙江省"揭榜挂帅"科技攻关项目(2021ZXJ02A01) (2021ZXJ02A01)

黑龙江科技大学学报

2095-7262

访问量0
|
下载量0
段落导航相关论文