| 注册
首页|期刊导航|可再生能源|高海拔地区钙钛矿/硅叠层电池的热力特性研究

高海拔地区钙钛矿/硅叠层电池的热力特性研究

高风胜 谢果 李亚东 郑清文 陈聪

可再生能源2025,Vol.43Issue(10):1305-1311,7.
可再生能源2025,Vol.43Issue(10):1305-1311,7.

高海拔地区钙钛矿/硅叠层电池的热力特性研究

Thermal-mechanical characteristics of perovskite/silicon tandem solar cell in high altitude areas

高风胜 1谢果 1李亚东 1郑清文 1陈聪2

作者信息

  • 1. 四川大学 水利水电学院,四川 成都 610065
  • 2. 四川大学 材料科学与工程学院,四川 成都 610065
  • 折叠

摘要

Abstract

Perovskite/silicon tandem solar cell has the advantages of high power-generation efficiency and low cost.In order to explore the feasibility of the application of this type of solar cell in high altitude areas,a numerical simulation model was built for analyzing the thermal-mechanical characteristics of perovskite/silicon tandem solar cell.Effect of environmental parameters on the temperature,thermal stress and thermal deformation has been investigated.The typical locations were selected as Kela,Longyangxia,Maoergai,Xiaowan and Yebatan.Experimental and simulation results were listed below.The average temperature and efficiency of solar cell in the typical summer scene in Kola area are 30.3℃and 19.776%respectively.In the Xiaowan area,under the high temperature conditions in summer,the highest cell temperature is 51℃,with the maximum thermal stress and thermal deformation of 24 MPa and 4.86×10-7 m respectively.In the Maoergai area,under the low temperature conditions in winter,the lowest cell temperature is-34℃,with the maximum thermal stress and thermal deformation of 47 MPa and 8.48×10-7 m respectively.The research data can provide evidence for the large-scale engineering application of perovskite/silicon tandem solar cell in high-altitude areas.

关键词

钙钛矿/硅叠层电池/实验/高海拔地区/热力特性/仿真计算

Key words

perovskite/silicon tandem solar cell/experiment/high-altitude areas/thermal-mechanical characteristics/simulation

分类

能源科技

引用本文复制引用

高风胜,谢果,李亚东,郑清文,陈聪..高海拔地区钙钛矿/硅叠层电池的热力特性研究[J].可再生能源,2025,43(10):1305-1311,7.

基金项目

国家自然科学基金(51606130). (51606130)

可再生能源

OA北大核心

1671-5292

访问量0
|
下载量0
段落导航相关论文