| 注册
首页|期刊导航|计算力学学报|基于Bubble的二维网格质量优化方法研究

基于Bubble的二维网格质量优化方法研究

王娜娜 韩升 田野

计算力学学报2025,Vol.42Issue(5):871-876,6.
计算力学学报2025,Vol.42Issue(5):871-876,6.DOI:10.7511/jslx20240814002

基于Bubble的二维网格质量优化方法研究

Research on 2D mesh quality optimization method based on Bubble

王娜娜 1韩升 2田野3

作者信息

  • 1. 山西警察学院网络安全保卫系,太原 030401
  • 2. 北京交通大学计算机科学与技术学院,北京 100044
  • 3. 太原师范学院计算机科学与技术学院,晋中 030619
  • 折叠

摘要

Abstract

In computational fluid dynamics,mesh quality greatly affects the accuracy and computational efficiency of numerical simulation results.The Bubble does not require the consideration of intersection judgments and has a relatively simple data structure,which has significant advantages in mesh generation efficiency and quality.The process of improving the mesh quality by moving nodes based on the traditional Bubble is optimized in this article,and we define it as the Bubble-Opt method.In this method,a bubble radius selection method combined with neural networks is used to generate the initial bubbles,and an improved bubble dynamic movement technique is used to adjust the bubbles to the appropriate position.The Delaunay method is used to connect the center of bubbles to form the final optimized mesh.Then,the optimization effects of different bubble radius selection methods and Bubble-Opt methods are compared under different process parameters.Taking the flow around a 2D cylinder as an example,the geometric quality and transition ratio of the mesh before and after optimization are tested.For this example,there is a set of optimal parameters and a radius selection method that achieve the best mesh quality optimization effect.The average transition ratio can be improved by about 17.37%,the average mesh quality can be improved by about 13.60%,and the minimum transition ratio and minimum mesh quality can be significantly improved.Finally,under the radius selection method and process parameters,taking two-dimensional cylindrical flow and NACA0012 airfoil flow as examples,the numerical simulation results are compared with experimental data from both qualitative and quantitative perspectives,indicating a significant improvement in the overall grid quality.

关键词

气泡堆积法/网格优化/机器学习/计算流体力学

Key words

Bubble/mesh optimization/machine learning/computational fluid dynamics

分类

数学

引用本文复制引用

王娜娜,韩升,田野..基于Bubble的二维网格质量优化方法研究[J].计算力学学报,2025,42(5):871-876,6.

基金项目

山西省高等学校科技创新项目(2020L0716) (2020L0716)

山西省高等学校一般性教学改革项目(J2021844 ()

J20231556) ()

山西省青少年发展研究立项课题(JT2023E86)资助项目. (JT2023E86)

计算力学学报

OA北大核心

1007-4708

访问量0
|
下载量0
段落导航相关论文