| 注册
首页|期刊导航|中国造纸|热压工艺提升木质纤维素膜强度与防水性能的研究

热压工艺提升木质纤维素膜强度与防水性能的研究

夏季 王于峰 张明粮 陈建斌 王海平

中国造纸2025,Vol.44Issue(10):15-23,9.
中国造纸2025,Vol.44Issue(10):15-23,9.DOI:10.11980/j.issn.0254-508X.2025.10.002

热压工艺提升木质纤维素膜强度与防水性能的研究

Research on Enhancing the Strength and Waterproof Performance of Lignocellulosic Films by Hot Pressing Process

夏季 1王于峰 1张明粮 1陈建斌 2王海平3

作者信息

  • 1. 浙江科技大学,浙江 杭州,310023
  • 2. 浙江华邦新材料有限公司,浙江 衢州,324400
  • 3. 浙江科技大学,浙江 杭州,310023||浙江华邦新材料有限公司,浙江 衢州,324400
  • 折叠

摘要

Abstract

This study employed deep eutectic solvents(DES,choline chloride/oxalic acid)to treat high yield pulp(HYP).Following vacuum filtration,ultrasonication,and hot pressing,high-performance lignocellulosic films(HYP/DES/HP films)were prepared.The effects of hot-pressing conditions on the mechanical strength and hydrophobicity of the HYP/DES/HP films were investigated.The results showed that un-der optimum hot pressing conditions(140℃,8 MPa,and 9 min),the mechanical strength and water contact angle of the HYP/DES/HP film reached 16.24 MPa and 87.9°,respectively,representing increased of 88.2%and 74.4%compared to the lignocellulosic film without hot pressing.

关键词

低共熔溶剂/纤维素/高得率浆/热压/防水

Key words

deep eutectic solvents/cellulose/high yield pulp/hot pressing/waterproof

分类

轻工纺织

引用本文复制引用

夏季,王于峰,张明粮,陈建斌,王海平..热压工艺提升木质纤维素膜强度与防水性能的研究[J].中国造纸,2025,44(10):15-23,9.

中国造纸

OA北大核心

0254-508X

访问量0
|
下载量0
段落导航相关论文