首页|期刊导航|中国造纸|纸张多通道烘缸干燥特性及其性能研究

纸张多通道烘缸干燥特性及其性能研究OA北大核心

Research on Paper Drying Characteristics and Performance of Multi-channel Dryer

中文摘要英文摘要

为探究不同因素对于纸张多通道烘缸干燥的影响,本研究以漂白针叶木浆和漂白阔叶木浆为原料,采用控制变量法,研究了浆料配比、打浆度、纸张定量、通道蒸汽温度、蒸汽质量通量对纸张干燥特性与纸张性能的影响.结果表明,增加阔叶浆料的比例,降低打浆度及定量,有助于提高纸张的透气度与干燥速率,其中定量对纸张干燥速率的影响最为显著;纸张抗张指数及撕裂指数随着阔叶浆比例降低、打浆度及定量增加而上升,打浆度25 °SR时,撕裂指数最佳,纸张定量80 g/m2时,抗张指数最佳;提高多通道烘缸的蒸汽温度与质量通量可增加传热量,加快干燥速率,但会降低纸张透气度,抗张指数与撕裂指数随着蒸汽参数上升先逐渐增加后趋于稳定,蒸汽温度对纸张的影响更为显著.

In order to explore the influence of different factors on multi-channel dryer drying of paper,the effects of pulp ratio,beating de-gree,paper basis weight,channel steam temperature and steam mass flux on paper drying characteristics and paper properties were studied by control variable method.The results showed that increasing the proportion of hardwood pulp and reducing the beating degree and basis weight were helpful to improve the air permeability and drying rate of paper,and the basis weight had the most significant effect on the dry-ing rate of paper.The tensile index and tear index of paper increased with the decrease of the proportion of hardwood pulp and the increase of beating degree and basis weight.The tear index was the best when the beating degree was 25 °SR,and the tensile index was the best when the basis weight was 80 g/m2.Increasing the steam temperature and mass flux of the multi-channel dryer could increase the heat transfer and accelerate the drying rate,but it will reduce the air permeability of the paper.The tensile index and tear index increased first and then tend-ed to be stable with the increase of steam parameters.The effect of steam temperature on paper was more significant.

李芝倩;袁越锦;徐英英;史韵

陕西科技大学机电工程学院,陕西 西安,710021陕西科技大学机电工程学院,陕西 西安,710021陕西科技大学机电工程学院,陕西 西安,710021陕西科技大学机电工程学院,陕西 西安,710021

轻工业

多通道烘缸纸张干燥特性纸张性能

multi-channel dryerpaper drying characteristicspaper performance

《中国造纸》 2025 (11)

177-185,9

"十四五"全国农业科技创新能力条件建设项目(201062401).

10.11980/j.issn.0254-508X.2025.11.024

评论