| 注册
首页|期刊导航|中国造纸|预水解玉米秸秆基质化学热磨机械浆配抄瓦楞原纸研究

预水解玉米秸秆基质化学热磨机械浆配抄瓦楞原纸研究

胡思丝 程鑫磊 林丹妮 苗庆显 黄方 黄六莲

中国造纸2025,Vol.44Issue(11):114-119,6.
中国造纸2025,Vol.44Issue(11):114-119,6.DOI:10.11980/j.issn.0254-508X.2025.11.015

预水解玉米秸秆基质化学热磨机械浆配抄瓦楞原纸研究

Research on the Preparation of Corrugated Board Paper by Blended Papermaking with Chemi-thermomechanical Pulping of Pre-hydrolyzed Corn Straw Substrate

胡思丝 1程鑫磊 1林丹妮 1苗庆显 1黄方 1黄六莲1

作者信息

  • 1. 福建农林大学材料工程学院,福建 福州,350108
  • 折叠

摘要

Abstract

This study used pre-hydrolyzed corn stover-based chemi-thermomechanical pulp(C-CTMP)and old corrugated container(OCC)pulp as raw materials,aiming to enhance the properties of corrugated paper by optimizing refining,blending,and sizing processes.The results showed that after C-CTMP was refined with 5 000 r in a PFI mill(reaching a freeness of 45 °SR),the paper achieved optimal mechanical properties,in-cluding a breaking length of 5.64 km,burst index of 2.60 kPa·m2/g,tear index of 5.40 mN·m2/g,and ring crush index of 8.74 N·m/g.When C-CTMP mass ratio was 40%,the produced corrugated paper exhibited a density of 0.62 g/cm3,breaking length of 4.25 km,and ring crush index of 8.24 N·m/g,all demonstrating favorable mechanical performance.Furthermore,with the addition of 0.25%alkyl ketene dimer(AKD)and 1%dry cationic starch(both based on oven-dry pulp mass),the corrugated paper achieved a density of 0.60 g/cm3,breaking length of 4.56 km,ring crush index of 8.62 N·m/g,and water absorption Cobb60 value of 13.00 g/m2,meeting the requirements for Grade AAA premium products under GB/T 13023-2008.

关键词

玉米秸秆/预水解化学热磨机械浆/OCC浆/瓦楞原纸

Key words

corn straw/pre-hydrolyzed chemi-thermomechanical pulping/OCC pulp/corrugated paper

分类

轻工业

引用本文复制引用

胡思丝,程鑫磊,林丹妮,苗庆显,黄方,黄六莲..预水解玉米秸秆基质化学热磨机械浆配抄瓦楞原纸研究[J].中国造纸,2025,44(11):114-119,6.

基金项目

宜宾市竹产业重大攻关项目(YBZD202401). (YBZD202401)

中国造纸

OA北大核心

0254-508X

访问量0
|
下载量0
段落导航相关论文