| 注册
首页|期刊导航|中国塑料|单轴拉伸乙烯-四氟乙烯共聚物薄膜的制备及性能研究

单轴拉伸乙烯-四氟乙烯共聚物薄膜的制备及性能研究

安立红 屠毅 张桂珍

中国塑料2025,Vol.39Issue(11):1-6,6.
中国塑料2025,Vol.39Issue(11):1-6,6.DOI:10.19491/j.issn.1001-9278.2025.11.001

单轴拉伸乙烯-四氟乙烯共聚物薄膜的制备及性能研究

Preparation and properties of uniaxially stretched poly(ethylene-co-tetrafluoroethylene)films

安立红 1屠毅 1张桂珍1

作者信息

  • 1. 华南理工大学机械与汽车工程学院,广东省高分子先进制造技术及装备重点实验室,聚合物新型成型装备国家工程研究中心,广州 510641
  • 折叠

摘要

Abstract

Uniaxially stretched poly(ethylene-co-tetrafluoroethylene)(ETFE)films were prepared to investigate the im-pact of processing parameters on their properties.The crystallinity,mechanical performance,and optical transparency of the films were characterized as functions of stretching temperature,stretching ratio,and heat-setting temperature.The results indicated that the stretching process promoted stress-induced crystallization,with the stretching ratio being the pri-mary factor governing the increase in crystallinity,while the stretching temperature had a comparatively minor influence.The optimum stretching conditions,a ratio of 3 and a temperature of 120℃,produced a film with a crystallinity degree of 35.6%,tensile strength of 106.4 MPa,longitudinal tear strength that was 1.9 times higher than the pristine film,and 90.1%transmittance.Heat-setting at 220℃for 5 minutes was determined to be optimal,resulting in additional in-crements in crystallinity degree(3.8%)and tensile strength(9.3 MPa).Further extension of the heat-setting duration proved ineffective in enhancing the film properties.

关键词

乙烯-四氟乙烯共聚物/单轴拉伸/透光性

Key words

poly(ethylene-tetrafluoroethylene)/uniaxial stretching/translucency

分类

化学工程

引用本文复制引用

安立红,屠毅,张桂珍..单轴拉伸乙烯-四氟乙烯共聚物薄膜的制备及性能研究[J].中国塑料,2025,39(11):1-6,6.

中国塑料

OA北大核心

1001-9278

访问量0
|
下载量0
段落导航相关论文