| 注册
首页|期刊导航|化工进展|油胺改性碳包覆二硫化钼复合材料的制备及其摩擦学性能分析

油胺改性碳包覆二硫化钼复合材料的制备及其摩擦学性能分析

程启文 李清华 王浩帆 曹永海 王红娟 余皓

化工进展2025,Vol.44Issue(z1):400-412,13.
化工进展2025,Vol.44Issue(z1):400-412,13.DOI:10.16085/j.issn.1000-6613.2025-0621

油胺改性碳包覆二硫化钼复合材料的制备及其摩擦学性能分析

Preparation and tribological properties of oleylamine-modified carbon coated molybdenum disulfide composites

程启文 1李清华 2王浩帆 1曹永海 1王红娟 1余皓1

作者信息

  • 1. 华南理工大学化学与化工学院,广东 广州 510641
  • 2. 安美科技股份有限公司,广东东莞 523808
  • 折叠

摘要

Abstract

Synthetic ester-based lubricants,owing to their excellent lubricating performance and biodegradability,align with the requirements of energy conservation and environmental protection,serving as a critical alternative to mineral oils.To adapt to practical operating conditions,the development of specialized lubricant additives for ester-based oils is essential.This work focused on molybdenum disulfide(MoS2),a typical two-dimensional nanomaterial with remarkable lubrication properties.Through a novel strategy combining tannic acid-iron ion(TA-Fe3+)complexation followed by annealing,an oleylamine-modified carbon-coated MoS2 composite(MoS2@C)was fabricated.The carbon coating served as a protective barrier to prevent the inherent oxidation-induced degradation of MoS2,while the long-chain alkyl groups of oleylamine(OAm)were grafted onto the MoS2@C surface via chemisorption or coordination bonding.The resultant OAm-MoS2@C additive demonstrated stable dispersion in the ester-based oil tri methylolpropane trioleate(TMPTO)over 30 days.The material's structure was characterized using multiple characterization techniques.Notably,with the addition of 0.3%OAm-MoS2@C-300,the average friction coefficient and average wear scar diameter were reduced by 33.0%and 14.4%,respectively,compared to the base oil under a load of 392N.Furthermore,the maximum non-seizure load(PB)and sintering load(PD)were enhanced by 94.9%and 25%,respectively.Finally,the tribological surface was characterized using X-ray photoelectron spectroscopy(XPS)and Raman spectroscopy,revealing a lubrication mechanism characterized by optimized film formation and synergistic lubrication effects.This approach showed promise for applications in cutting fluids,where it could effectively reduce friction and wear.

关键词

二硫化钼/纳米材料/复合材料/磨损/摩擦学性能/合成酯类润滑油

Key words

molybdenum disulfide/nanomaterials/composites/attrition/tribological properties/synthetic ester lubricants

分类

化学化工

引用本文复制引用

程启文,李清华,王浩帆,曹永海,王红娟,余皓..油胺改性碳包覆二硫化钼复合材料的制备及其摩擦学性能分析[J].化工进展,2025,44(z1):400-412,13.

化工进展

OA北大核心

1000-6613

访问量0
|
下载量0
段落导航相关论文