| 注册
首页|期刊导航|高电压技术|单路LTD脉冲源触发时序优化方法

单路LTD脉冲源触发时序优化方法

JIANG Hongyu JIANG Xiaofeng WANG Zhiguo SUN Fengju WEI Hao QIU Aici

高电压技术2025,Vol.51Issue(12):6085-6093,中插29,10.
高电压技术2025,Vol.51Issue(12):6085-6093,中插29,10.DOI:10.13336/j.1003-6520.hve.20241760

单路LTD脉冲源触发时序优化方法

Trigger Timing Optimization Method of Single-module LTD Pulsed Source

JIANG Hongyu 1JIANG Xiaofeng 2WANG Zhiguo 2SUN Fengju 2WEI Hao 2QIU Aici1

作者信息

  • 1. State Key Laboratory of Electrical Insulation and Power Equipment(Xi'an Jiaotong University),Xi'an 710049,China||National Key Laboratory of Intense Pulsed Radiation Simulation and Effect,Northwest Institute of Nuclear Technology,Xi'an 710024,China
  • 2. National Key Laboratory of Intense Pulsed Radiation Simulation and Effect,Northwest Institute of Nuclear Technology,Xi'an 710024,China
  • 折叠

摘要

Abstract

Adjusting the switch trigger timing of each stage can realize the output waveform control of the Linear Trans-former driver(LTD).Establishment of a full-circuit model which reflects the switch triggered close time of each stage and secondary electromagnetic wave transmission process,as well as the automatic optimization of switch trigger timing for specific output waveform by combining with the search optimization algorithm,is the basis of LTD application experi-ments.In this paper,the trigger timing optimization method of single-module LTD based on the Bergeron algorithm and particle swarm optimization gravitation search algorithm is established.Under the conditions of given pulsed source cir-cuit parameters and output waveform requirements,the trigger timing coefficients are optimized.The calculated results are in agreement with the cascade-triggering experiment of the 12-stage LTD pulsed source,which verifies the effective-ness of the proposed method,and the number of iterations per calculation is less than 10.The results show that,when the 12-stage LTD pulsed source is charged±60 kV,the trigger timing coefficient ranges from 0.96 to 1.39,the output current amplitude of the pulsed source is(766±8)kA,and the output current front is adjustable from 96 to 109.6 ns.The optimi-zation method can provide the crucial trigger timing parameters for waveform control of large-scale LTD pulsed power devices.

关键词

单路LTD/互感/贝杰龙算法/触发时序/粒子群引力搜索算法/级联触发

Key words

single-module LTD/mutual inductance/Bergeron algorithm/trigger timing/particle swarm optimization gravitation search algorithm/cascaded trigger

引用本文复制引用

JIANG Hongyu,JIANG Xiaofeng,WANG Zhiguo,SUN Fengju,WEI Hao,QIU Aici..单路LTD脉冲源触发时序优化方法[J].高电压技术,2025,51(12):6085-6093,中插29,10.

基金项目

国家自然科学基金(12027811 ()

12275222). Project supported by National Nature Science Foundation of China(12027811,12275222).. (12027811,12275222)

高电压技术

OA北大核心

1003-6520

访问量0
|
下载量0
段落导航相关论文