宇航材料工艺2025，Vol.55Issue(6)：40-46,7.DOI:10.12044/j.issn.1007-2330.2025.06.005
C/C-SiC复合材料磨削温度试验研究
Experimental Study on Grinding Temperature of C/C-SiC Composite Materials
摘要
Abstract
In order to study the effect of grinding process parameters on the grinding temperature of C/C-SiC composites,a three-factor four-level orthogonal experiment was to investigate the influence of different grinding parameters on the grinding temperature.The range analysis method was used to evaluate the degree of influence of relevant process parameters on the grinding temperature,and a comparison was made between the grinding temperatures under dry grinding and minimum quantity lubrication(MQL)grinding.The results show that MQL grinding can reduce the grinding temperature and improve surface machining quality;in dry grinding,the order of parameters influence on temperature is grinding depth,wheel peripheral speed,and table feed rate,whereas under MQL grinding,the influence order is wheel peripheral speed,grinding depth,and table feed rate.关键词
C/C-SiC复合材料/磨削加工/磨削温度/微量润滑磨削Key words
C/C-SiC composite materials/Grinding process/Grinding temperature/Minimal quantity lubrication(MQL)分类
通用工业技术引用本文复制引用
宋铁军,朱治民,李锦华,陈果,殷升..C/C-SiC复合材料磨削温度试验研究[J].宇航材料工艺,2025,55(6):40-46,7.基金项目
国家自然科学基金(52275406) （52275406）
湖南省电磁装备设计与制造重点实验室开发基金(DC201902) （DC201902）
