北京测绘2026，Vol.40Issue(1)：57-62,6.DOI:10.19580/j.cnki.1007-3000.2026.01.009
基于机载LiDAR点云数据电力线交叉跨越测量方法
Measurement method of power line crossing based on airborne LiDAR point cloud data
摘要
Abstract
Traditional power line crossing measurement techniques face challenges such as low efficiency and high labor intensity due to the conventional manual and total station measurement methods.This study aims to overcome these limita-tions and achieve a new,intelligent,rapid,and accurate measurement approach.The paper proposes using airborne light detection and ranging(LiDAR)point cloud data to obtain high-precision three-dimensional information of power lines.By filtering and classifying the raw point cloud data,power line points are extracted from non-ground points.The catenary char-acteristics are then used to fit the power lines.Finally,the distance between the power lines and the ground is measured to determine elevation,and the results are compared with field measurements.The findings indicate that airborne LiDAR point cloud data enables efficient and accurate extraction and crossing measurement of power lines,providing a valuable reference for practical engineering applications.关键词
机载激光雷达/电力线提取/点云滤波/悬链线Key words
airborne light detection and ranging(LiDAR)/power line extraction/point cloud filtering/catenary分类
天文与地球科学引用本文复制引用
李邹军,黄文华,许志强..基于机载LiDAR点云数据电力线交叉跨越测量方法[J].北京测绘,2026,40(1):57-62,6.基金项目
中国电力工程顾问集团有限公司集中开发科研项目(DG2-L02-2024) （DG2-L02-2024）
