电焊机2026，Vol.56Issue(1)：116-119,127,5.DOI:10.7512/j.issn.1001-2303.2026.01.16
基于固有应变法的LNG储罐筒体与封头焊接仿真
Simulation of Cylinder and Head Welding of LNG Storage Tank based on Natural Strain Method
周鲁兵 1夏羽 1包志刚 1吴慧峰 1杨尚贤 2冯消冰2
作者信息
- 1. 南通中集太平洋海洋工程有限公司,江苏 南通 226251
- 2. 北京博清科技有限公司,北京 100176
- 折叠
摘要
Abstract
In order to optimize the welding operation of LNG storage tank and improve the safety and service life of the structural parts,the welding construction simulation model of LNG storage tank cylinder and head was established based on the inherent strain method,and the welding deformation and stress variation laws of the structural parts were solved and ana-lyzed.The results show that the welding residual stress is mainly concentrated in the clamping point of the horse plate,the maximum residual stress is 512.5 MPa,and the welding residual deformation is mainly concentrated in the weld area,the maximum deformation is 19.4 mm.In order to reduce residual deformation and stress,the matching state of each component of the LNG storage tank should be adjusted during actual welding to avoid multiple welds intersecting in the same area.The step skip welding method is used for welding,and the stress relief annealing is carried out on the welded structural parts.The conclusion can provide theoretical guidance for optimizing the welding operation of LNG storage tank and prolonging the service life of structural parts.关键词
固有应变法/LNG储罐/焊接施工/仿真优化Key words
inherent strain method/LNG storage tank/welding construction/simulation optimization分类
矿业与冶金引用本文复制引用
周鲁兵,夏羽,包志刚,吴慧峰,杨尚贤,冯消冰..基于固有应变法的LNG储罐筒体与封头焊接仿真[J].电焊机,2026,56(1):116-119,127,5.
