机械科学与技术2026，Vol.45Issue(1)：12-19,8.DOI:10.13433/j.cnki.1003-8728.20240017
风机塔筒螺栓节点的屈服紧固过程和预紧力监测研究
Study on Yield Control Tightening Process and Preload Monitor of Bolted Joints for Wind Turbine Tower
张华 1周盛龙 1徐永生 2杨鹤松 1张晓萱 1郑亚然1
作者信息
- 1. 华能新能源股份有限公司云南分公司,昆明 650201
- 2. 上海交通大学船舶海洋与建筑工程学院,上海 200240
- 折叠
摘要
Abstract
The yield control method of tightening can obtain the maximum available preload and which distribution is relatively uniform.However,it is difficult to observe the tightening process and measure the preload once the bolt entering the plastic zone.By using the yield control method for large flange bolts of fan tower flange,the quantitative relationship between the bolt lubrication and the yield control methods are studied by using the precise finite element method(FEM)and the tightening experiment.The research shows that the relationship between the bolt preload and the torque are linear throughout the entire tightening process,and the nut factor is linearly related to the friction coefficient.The increase in friction coefficient will lead to increase the torsional effect of the bolt and the shear stress at the thread,while resulting in the earlier bolt yield and reduces the preload after tightening.There is not a correlation between the bolt elongation and the friction coefficient,and the preload in the elastic section can be accurately controlled according to the nut rotation angle.In addition,the correction factor has been introduced to measure the bolt preload based on the elongation method with the yield control method,which is independent of the bolt lubrication state,while accelerates to decrease with the increasing of bolt yield level.关键词
螺栓/屈服紧固/塔筒法兰/有限元仿真Key words
bolt/yield control tightening/tower flange/finite element method分类
机械制造引用本文复制引用
张华,周盛龙,徐永生,杨鹤松,张晓萱,郑亚然..风机塔筒螺栓节点的屈服紧固过程和预紧力监测研究[J].机械科学与技术,2026,45(1):12-19,8.
