农机使用与维修Issue(1)：38-41,4.DOI:10.14031/j.cnki.njwx.2026.01.008
圆捆包夹持机构的设计与试验
Design and experiment of the clamping mechanism for round bales
林鹏1
作者信息
- 1. 黑龙江省农业机械工程科学研究院齐齐哈尔分院,黑龙江 齐齐哈尔 161000
- 折叠
摘要
Abstract
To address the requirements of rapid loading/unloading and short-distance transportation of round bales,a clamping mechanism was designed.This mechanism can be quickly connected to a forklift via a hinge and is capable of grabbing and moving round bales.SolidWorks software was used for overall 3D modeling,and the Simulation module in SolidWorks was utilized to conduct static stress analysis on key components.The results show that the maximum stress is 1.542 × 102 N/mm2 and the maximum deformation is 0.601 1 mm,which can meet the operational requirements.A pro-totype of the mechanism was manufactured and tested.Test results indicate that the mechanism exhibited no welding fail-ure or fracture during operation,with loading and unloading efficiencies of 127 bales/h and 130.3 bales/h in two sepa-rate test runs,respectively meeting the design requirements for the clamping of round bales.关键词
圆捆包/夹持机构:设计/SolidWorksKey words
round bales/clamping mechanism/design/SolidWorks分类
农业科技引用本文复制引用
林鹏..圆捆包夹持机构的设计与试验[J].农机使用与维修,2026,(1):38-41,4.
