首页|期刊导航|中国铸造|Influence of mold wall thickness on morphologies of defect band in high-pressure die casting technology

Influence of mold wall thickness on morphologies of defect band in high-pressure die casting technology

Zhen-yu Sun Wen-bo Yu Jun-jie Li Wei-chen Zheng Guang-rui Wang Jian-ru Fang Shou-mei Xiong

中国铸造2026，Vol.23Issue(1)：31-36,6.

中国铸造2026，Vol.23Issue(1)：31-36,6.DOI:10.1007/s41230-026-4124-6

Influence of mold wall thickness on morphologies of defect band in high-pressure die casting technology

Zhen-yu Sun ¹Wen-bo Yu ¹Jun-jie Li ¹Wei-chen Zheng ¹Guang-rui Wang ¹Jian-ru Fang ²Shou-mei Xiong³

作者信息

1. Center of Materials Science and Engineering,School of Mechanical and Electronic Control Engineering,Beijing Jiaotong University,Beijing 100044,China
2. Dalian Yaming Auto Parts Co.,Ltd.,Dalian 116041,Liaoning,China
3. School of Materials Science and Engineering,Tsinghua University,Beijing 100084,China
折叠

摘要

关键词

AlSi10MgMn/high pressure die casting/defect band/mold flow analysis/externally solidified crystals

Key words

AlSi10MgMn/high pressure die casting/defect band/mold flow analysis/externally solidified crystals

分类

矿业与冶金

引用本文复制引用

Zhen-yu Sun,Wen-bo Yu,Jun-jie Li,Wei-chen Zheng,Guang-rui Wang,Jian-ru Fang,Shou-mei Xiong..Influence of mold wall thickness on morphologies of defect band in high-pressure die casting technology[J].中国铸造,2026,23(1):31-36,6.

基金项目

This work was supported by the National Natural Science Foundation of China(No.52474396 and 52175284)and the National Key Research and Development Program of China(Grant No.2022YFB3404201).Thanks to the technical support of BL13W1 beamline in Shanghai Synchrotron Radiation Facility(SSRF)and Gaomi Xiangyu company. （No.52474396 and 52175284）

中国铸造

ISSN：1672-6421

访问量0

下载量0

段落导航