| 注册
首页|期刊导航|强激光与粒子束|用于加速器中子源的斩束器研究与设计

用于加速器中子源的斩束器研究与设计

潘文龙 李海鹏 王盛 苏浩泉 朱颉

强激光与粒子束2026,Vol.38Issue(2):82-87,6.
强激光与粒子束2026,Vol.38Issue(2):82-87,6.DOI:10.11884/HPLPB202638.250164

用于加速器中子源的斩束器研究与设计

Research and design of chopper for accelerator neutron source

潘文龙 1李海鹏 1王盛 2苏浩泉 1朱颉1

作者信息

  • 1. 西安交通大学 核科学与技术学院,西安 710049||西安交通大学 湖州中子科学实验室,浙江 湖州 313000
  • 2. 西安交通大学 核科学与技术学院,西安 710049||西安交通大学 湖州中子科学实验室,浙江 湖州 313000||华硼中子科技(杭州)有限公司,杭州 310000
  • 折叠

摘要

Abstract

[Background]Cancer is a major global health issue.With the development of accelerator physics,boron neutron capture therapy based on accelerator neutron sources has received widespread attention.In the accelerator system,the low energy beam transport is responsible for connecting the ion source and accelerator,as well as processing the beam.For the problem of beam deflection,the chopper is required,so a high-performance chopper is crucial for the entire system.[Purpose]This study aims to improve the electric field uniformity of the chopper by using circular arc plates instead of parallel plates,and to simulate the chopper design through Python program coupling using CST Studio Suite and TraceWin software.[Methods]The beam deflection formula of the chopper was theoretically derived,and the electrostatic and beam dynamics design was completed using CST Studio Suite and TraceWin software.The advantages and feasibility of the circular arc plate were verified through coupling simulation of the two software.[Results]Theoretical calculations and simulations show that the electric field distribution of circular arc plates is more uniform,and the beam deflection function is efficiently completed,confirming the feasibility of the design scheme.[Conclusions]By coupling CST Studio Suite with TraceWin software for simulation,a more realistic simulation of beam dynamics can be achieved,which addresses the issue that TraceWin software is incapable of setting the electric field strength of circular arc plates.The coupled simulation method of CST Studio Suite and TraceWin has been developed,which has certain value for research on chopper design.

关键词

加速器中子源/硼中子俘获治疗/斩束器/束流动力学/静电场计算

Key words

accelerator-based neutron source/boron neutron capture therapy/chopper/beam dynamic/electrostatic field calculation

分类

能源科技

引用本文复制引用

潘文龙,李海鹏,王盛,苏浩泉,朱颉..用于加速器中子源的斩束器研究与设计[J].强激光与粒子束,2026,38(2):82-87,6.

基金项目

国家自然科学基金项目(12105214) (12105214)

强激光与粒子束

1001-4322

访问量0
|
下载量0
段落导航相关论文