电气技术2026，Vol.27Issue(2)：25-31,39,8.
基于Sepic-Cuk的零纹波双极性输出直流变换器
Research on zero-ripple bipolar output DC-DC converter based on Sepic-Cuk topology
摘要
Abstract
With increasing integration of renewable energy sources like photovoltaics and fuel cells into power grids,bipolar DC microgrids have shown significant advantages.To overcome limitations such as high input current ripple and low voltage gain in conventional converters,a zero-ripple bipolar DC-DC converter based on a Sepic-Cuk structure is proposed.The converter combines Sepic and Cuk topologies using shared inductors and switches,achieving symmetrical bipolar output by utilizing their complementary voltage gain characteristics.Capacitor clamping reduces input current ripple,while coupled inductors increase voltage gain.The converter is analyzed systematically,covering operating principles,ripple suppression,and key parameter design.A prototype rated at 130 W,with a switching frequency of 100 kHz,an input voltage of 40 V,and a total output voltage of 360 V(±180 V),is built and tested.The measured output voltages show close agreement with theoretical calculations,and a conversion efficiency of 96.1％is achieved,confirming the effectiveness and feasibility of the proposed converter.关键词
零纹波/电容钳位/Sepic-Cuk/直流变换器/耦合电感Key words
zero ripple/capacitor clamp/Sepic-Cuk/DC-DC converter/coupled inductance引用本文复制引用
陈柯旭,林国庆..基于Sepic-Cuk的零纹波双极性输出直流变换器[J].电气技术,2026,27(2):25-31,39,8.基金项目
晋江市福大科教园区发展中心科研项目(2019-JJFDKY-37) （2019-JJFDKY-37）
