建筑结构学报2026，Vol.47Issue(1)：86-95,10.DOI:10.14006/j.jzjgxb.2024.0404
抗拉铅芯橡胶支座隔震高层结构极限状态响应和支座破坏模式研究
Ultimate responses and bearing failure modes of high-rise buildings isolated by anti-tension lead-plug laminated rubber bearings
摘要
Abstract
Severe earthquakes may lead to the tensile fracture of bearings in high-rise buildings. Therefore,structural stability would not be guaranteed. In this study,shaking table tests were performed on six base-isolated high-rise building models to investigate their ultimate responses and bearing failure modes. These models have aspect ratios of 3,5,or 7. The isolation layers of these test models were lead core rubber bearing (LRB) or anti-tension lead-plug laminated rubber bearing (TLRB). Results of tests indicate that when the peak ground accelerations reach 0. 95g,0. 80g,and 0. 70g,the ultimate motion types for these test models with aspect ratios of 3,5,and 7 are sinking type,rotating,and uplift-rotating around one side of the isolation layer. The corresponding failure modes of bearings are compressive-shear buckling,compressive-shear buckling,and tensile failure in order.On the other hand,the excessive displacements of test models are restrained by TLRB. Thus,TLRBs can prevent compressive-shear buckling and tensile failure. Meanwhile,the test model remained stable even when the overturning moment was far greater than the anti-overturning moment. A simplified numerical analysis model was established to investigate the ultimate behaviors of a base-isolated building. The accuracy of this numerical model was verified by test results. Parameter analysis indicates that a vertical earthquake may cause tensile fracture of the bearing. This situation can be prevented by increasing the building' s self-weight,but this will increase the likelihood of compressive-shear buckling of the bearings.关键词
基础隔震高层结构/抗拉铅芯橡胶支座/高宽比/极限状态/支座破坏模式Key words
base-isolated high-rise building/anti-tension lead-plug laminated rubber bearing/aspect ratio/ultimate state/bearing failure mode分类
机械制造引用本文复制引用
王栋,刘平,李强..抗拉铅芯橡胶支座隔震高层结构极限状态响应和支座破坏模式研究[J].建筑结构学报,2026,47(1):86-95,10.基金项目
陕西省一般项目-青年项目(2019JQ-339),中国博士后基金项目(2020M673441). （2019JQ-339）
