| 注册
首页|期刊导航|市政技术|小半径曲线钢箱梁步履式顶推局部受力及稳定性研究

小半径曲线钢箱梁步履式顶推局部受力及稳定性研究

蒲广宁 李学明 王明伟 阚世龙 赵澜婷

市政技术2026,Vol.44Issue(2):10-19,67,11.
市政技术2026,Vol.44Issue(2):10-19,67,11.DOI:10.19922/j.1009-7767.2026.02.010

小半径曲线钢箱梁步履式顶推局部受力及稳定性研究

Study on Local Stress and Stability of Incremental Launching Construction with Walking Joints of Small-radius Curved Steel Box Girders

蒲广宁 1李学明 2王明伟 2阚世龙 2赵澜婷2

作者信息

  • 1. 西安建筑科技大学土木工程学院,陕西西安 710055||陕西省城市基础设施数字化工程技术研究中心,陕西西安 710055
  • 2. 西安建筑科技大学土木工程学院,陕西西安 710055
  • 折叠

摘要

Abstract

Aiming at the complex internal force distribution problem in the incremental launching construction with walking joints of small-radius curve steel box girder bridges,this study focuses on the local stress and stability of steel box girders and proposes corresponding control methods based on the incremental launching of a 70 m radius ramp bridge.An overall analysis model was established by Midas/Civil software to simulate the whole incremental launching construction process.And the typical unfavorable working conditions were determined by the control indicators of the reaction force of temporary piers and the internal force of steel box girders;A local analysis model was established by shell elements to analyze the local stress and stability of the girder segments.The influence law of changes in main parameters on them was discussed.The results show that stress concentration occurs at the bottom of plate support and the root of the guide girder,while both the local stress and stability of the girder segments meet the requirements of relevant specifications;That increasing the thickness of the connecting structure plate of the guide girder can reduce the stress of the connecting web and significantly improve its local stability;The safe thresholds of the support height difference between the inner and outer fulcrums of the D3 temporary pier are 5 mm and 10 mm respectively.The fulcrum elevation should be strictly controlled during the construction;The structural safety still meets the requirements after reducing the stiffness of the base plate.The flexible materials for the upper base plate can improve the stress concentration at the bottom of plate;That adding corner stiffeners between the bottom plate and the web can greatly reduce the stress of each main force-bearing plate.

关键词

曲线钢箱梁/步履式顶推/局部稳定性/有限元模拟/控制措施

Key words

curved steel box girder/incremental launching construction with walking joints/local stability/finite element simulation/control measures

分类

交通工程

引用本文复制引用

蒲广宁,李学明,王明伟,阚世龙,赵澜婷..小半径曲线钢箱梁步履式顶推局部受力及稳定性研究[J].市政技术,2026,44(2):10-19,67,11.

基金项目

秦创原引用高层次创新创业人才项目(QCYRCXM-2022-148) (QCYRCXM-2022-148)

陕西省教育厅科学研究计划项目(24JR095) (24JR095)

市政技术

1009-7767

访问量0
|
下载量0
段落导航相关论文