有色金属材料与工程2026，Vol.47Issue(1)：36-44,9.DOI:10.13258/j.cnki.nmme.20250812001
Ni/Fe质量比对Cu-Ni-Fe-P合金组织及性能的影响
The effect of Ni/Fe mass ratio on the microstructure and properties of Cu-Ni-Fe-P alloy
摘要
Abstract
The effects of Cu-Ni-Fe-P alloy composition design,microstructure,and properties were investigated using optical microscope(OM),scanning electron microscope(SEM),transmission electron microscope(TEM),hardness testing,and electrical conductivity testing instruments.The results demonstrate that the Ni/Fe mass ratio significantly influenced the alloy's properties.When the Ni/Fe mass ratio was 3.00,the Vickers hardness of the Cu-Ni-Fe-P alloy reaches its peak at 171.5 under the condition of aging at 500℃for 0.50 h,and the average size of the precipitated phase at this time was 2.2 nm.When the aging time was extended to 12.00 h,the average size of the precipitated phase increased to 5.6 nm.The addition of Fe element reduced the solid solubility of solute atoms,effectively inhibited the lattice distortion in the matrix and improved the electrical conductivity.When the Ni/Fe mass ratio was 1.00,the Cu-Ni-Fe-Pa alloy attained a maximum electrical conductivity of 63.6%IACS under the aging condition of 500℃for 12.00 h.Among them,when the mass ratio of Ni/Fe was 1.00,under the aging condition of 500℃for 6.00 h,the comprehensive performance of Cu-Ni-Fe-P alloy is the best.关键词
Cu-Ni-Fe-P合金/Ni/Fe质量比/维氏硬度/电导率/微观组织Key words
Cu-Ni-Fe-P alloy/Ni/Fe mass ratio/Vickers hardness/electrical conductivity/microstructure分类
矿业与冶金引用本文复制引用
刘敬萱,柳青媛,周忠明,王小乐..Ni/Fe质量比对Cu-Ni-Fe-P合金组织及性能的影响[J].有色金属材料与工程,2026,47(1):36-44,9.基金项目
江西理工大学高层次人才科研启动基金资助项目(205200100541) （205200100541）
