化学工程2026，Vol.54Issue(3)：46-50,56,6.DOI:10.3969/j.issn.1005-9954.2026.03.008
固体氧化物电解池电堆内流体均布特性的数值仿真
Numerical simulation of flow distribution in solid oxide cell reactor
摘要
Abstract
The uniform distribution of fuel flow in solid oxide electrolytic cell reactor is one of the key factors to ensure the stable and efficient operation of the reactor.By simplifying the gas field model of the stack structure,the flow distribution of the 30-layer stack under two flow forms,U-type and Z-type,and the influence of different inlet and outlet forms on the flow distribution between layers were studied.The results show that,compared with the Z-type flow mode,the flow distribution uniformity between layers is better under the U-type flow mode.Through the comparison of different import and export forms,it is found that the flow distribution of 1 in 2 out is the best.In addition,in the basic model,the cross-sectional area of inlet and outlet manifold was increased to optimize,and the results of flow distribution between layers of the optimized model and the basic model were compared.It is found that the flow distribution uniformity between layers of the optimized structure model is significantly improved.关键词
固体氧化物电解池/电堆/流量分配Key words
solid oxide electrolytic cell/stack/flow rate distribution分类
信息技术与安全科学引用本文复制引用
严丽红,曹军..固体氧化物电解池电堆内流体均布特性的数值仿真[J].化学工程,2026,54(3):46-50,56,6.基金项目
国家自然科学基金资助项目(22393954) （22393954）
