可再生能源2026，Vol.44Issue(3)：345-353,9.
翼片型吸力锚的上拔承载特性分析
Analysis of pull-out bearing performance of finned suction caissons
摘要
Abstract
The finned suction caisson has gained significant attention in offshore wind power engineering due to its excellent in-place holding capacity.During service,the foundation simultaneously sustains environmental loads(wind,wave,and current)and pull-out loads transmitted through mooring chains.Using the finite element software ABAQUS,this study systematically investigates the pull-out response charac-teristics of a finned suction caisson with an aspect ratio of 1.5.The research focuses on the effects of key parameters including caisson-soil interface conditions,load inclination,padeye depth,and soil strength distribution on the foundation's mechanical behavior.Results indicate that the formation of tension gap significantly reduces the ultimate pull-out capacity of the foundation,with this weakening effect being more pronounced in traditional suction caissons,showing approximately 7%greater capacity reduction compared to finned suction caissons.The padeye location significantly influences the failure mechanism:when the padeye is located above its optimal depth,the soil exhibits an upper wedge-lower spoon failure mode;otherwise,the failure transitions from wedge sliding to spoon sliding.This study provides theoretical support for the design optimization and performance enhancement of finned suction caissons.关键词
承载力/基础/张力间隙/锚眼Key words
bearing performance/foundation/tension gap/padeye分类
能源科技引用本文复制引用
李刚,付登锋,刘博,崔少云,马凌,徐睿哲,陈杨明,闫玥..翼片型吸力锚的上拔承载特性分析[J].可再生能源,2026,44(3):345-353,9.基金项目
中国电力工程顾问集团有限公司科技项目(DG2-T04-2023) （DG2-T04-2023）
国家自然科学基金资助项目(42177122). （42177122）
