塑料科技2026，Vol.54Issue(2)：105-109,5.DOI:10.15925/j.cnki.issn1005-3360.2026.02.019
电机用环氧绝缘材料相容性的研究
Study on Compatibility of Epoxy Insulation Materials for Motors
摘要
Abstract
Epoxy insulating materials often need to be blended and compatibilized with other epoxy materials during preparation and application to meet service requirements,where compatibility is a critical factor determining the physicochemical properties and mechanical performance of blended materials.In the study,two types(1#and 2#)of commonly used two-component epoxy resin systems were mixed using specific processes,and their properties and micro-morphologies were characterized.The results showed that the mechanical properties of compatibilized blended and cured samples fell basically between those of the two pure samples,and no obvious linear interface was observed after sequential curing,indicating good compatibility between the two components.All prepared samples met relevant technical requirements.Although sequential curing required longer time,it exhibited superior performance.Considering all factors,samples obtained by sequential curing were finally selected.The research results provide a reference for the study of epoxy resin compatibility.关键词
环氧树脂/相容性/热性能/力学性能Key words
Epoxy resin/Compatibility/Thermal properties/Mechanical properties分类
化学化工引用本文复制引用
董晓英,刘雁,刘代军,吉彦兵,匡润,陈涛,刘喆,李万峰..电机用环氧绝缘材料相容性的研究[J].塑料科技,2026,54(2):105-109,5.基金项目
中国长江电力股份有限公司科技项目(Z232302030) （Z232302030）
