锅炉技术2026，Vol.57Issue(2)：18-23,6.
基于火电灵活性的600 MW机组高水分褐煤等离子体点火工业试验研究
Research on Industrial Test of Plasma Ignition for High-Moisture Lignite in 600 MW Units Based on Flexibility of Thermal Power Generation
摘要
Abstract
In light of 600 MW-class units fueled by high-moisture lignite,an industrial test on high-power plasma ignition was conducted.The influences of several factors on ignition,combustion,and boiler startup,including the initial fuel feed rate of the coal mill,primary air temperature,air velocity,and generator power,etc,were investigated.The test results indicate that for lignite with a total moisture content of 38.6%,plasma ignition enables a fuel-oil-free boiler startup.When applying plasma ignition to the cold start of a 600 MW-class boiler burning high-moisture lignite,the recommended initial fuel input is 24-25 t/h.The primary air velocity exerts a substantial effect on ignition stability,with a lower velocity being more favorable for stable combustion.Meanwhile,a higher hot air temperature and greater generator power are preferable for plasma ignition.When two layers of plasma burners are in operation,the NOx emissions are slightly reduced.This research accumulates valuable data and experience for constructing fuel-oil-free power stations for high-moisture lignite fired units,and also offers robust support for the flexibility retrofit and deep peak shaving participation of such units.关键词
高水分褐煤/灵活性/等离子体点火/锅炉/工业试验Key words
high moisture lignite/flexibility/plasma ignition/boiler/industrial test分类
能源科技引用本文复制引用
杨铁强,邹鹏,龚泽儒,李明,张一坤..基于火电灵活性的600 MW机组高水分褐煤等离子体点火工业试验研究[J].锅炉技术,2026,57(2):18-23,6.基金项目
国家重点研发计划项目(2023YFB4102902) （2023YFB4102902）
