| 注册
首页|期刊导航|计算机与数字工程|基于红外分析的倒装芯片互连可靠性研究

基于红外分析的倒装芯片互连可靠性研究

李振远 万永康 虞勇坚 孟智超

计算机与数字工程2026,Vol.54Issue(1):299-304,6.
✕
计算机与数字工程2026,Vol.54Issue(1):299-304,6.DOI:10.3969/j.issn.1672-9722.2026.01.051

基于红外分析的倒装芯片互连可靠性研究

Research on Reliability of Flip Chip Interconnection Based on Infrared Analysis

李振远 1万永康 1虞勇坚 1孟智超1

作者信息

  • 1. 中国电子科技集团公司第五十八研究所 无锡 214035
  • 折叠

摘要

Abstract

In order to study the application of active infrared thermography in the reliability evaluation of flip chip intercon-nect structure,the temperature cycle test is first used for the flip chip bump to analyze IMC microstructure at interface between bump and plating layer.Then,defect implantation is performed on the BGA,and finally,the defect detection of interconnect struc-tures of flip-chip by infrared thermography is explored.The result show that IMC interface between bump and coating layer will dif-fuse and grow,and the composition gradually change from Ni6Sn5 to Ni3Sn2 and then to Ni3Sn.The stress is more concentrated at the interface between bump and pad plating layer,which is more prone to the expansion if cracks,resulting in reduced reliability.Infrared thermography can be used to locate BGA defects using the blocked temperature transfer.For bump,the defect is not obvi-ous due to the underfill material reducing the CTE mismatch effect.

关键词

倒装芯片/互连结构/金属间化合物/可靠性/主动红外热成像

Key words

flip chip/interconnect structure/intermetallic compound/reliability/active infrared thermography

分类

信息技术与安全科学

引用本文复制引用

李振远,万永康,虞勇坚,孟智超..基于红外分析的倒装芯片互连可靠性研究[J].计算机与数字工程,2026,54(1):299-304,6.

计算机与数字工程

1672-9722

访问量0
|
下载量0
段落导航相关论文